Bedienungsanleitung JVC SR-L910EK (Seite 6 von 28) (Englisch)

45658

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

2 CONTROLS AND CONNECTORS

2-2 Display

11 12

TIMER indication

Lights during timer recording programming/operation.

REPEAT indication

Lights when the VCR is in the Repeat Record mode.

OVERLAP indication

Blinks when programs scheduled for timer recording

overlap.

Timer program number

During timer recording, the number of program being

recorded blinks.

When the timer recording ends, this number goes out.

AL (alarm) indication

Shown during alarm recording. Blinks when alarm

recording ends.

VISS indication

Shown when the alarm recording start point is index-

searched. For details, refer to

“Index Search” on page

42.

LOCK indication

Lights when the operation lock function is activated.

AL REC (alarm recording) indication

Lights when the function menu switch <ALARM REC> is

set to “ON”.

SENSOR REC (sensor recording) indication

Lights when the function menu switch <SENSOR REC>

is set to “ON”.

Operation mode display

Shows the operation modes.

Playback Recording

Rewind

Fast-

forward

Continuous field

advance playback

Still

Record-

pause

Rewind

Fast-forward

Reverse

playback

* (

) mark in the Rec/Pause mode is shown in red.

Cassette indication

Lights when a cassette is loaded. Blinks when a

cassette is being ejected.

SP/LP indication

Shows the VHS standard (SP) mode during recording/

playback.

During Timelapse Recording/Playback mode, the SP

indicator is shown.

Tape counter/time indication

• When the power is turned on, the tape counter or

current time are shown. The display can be selected

with the [CNT/TIME] button.

• When the power is turned off, the present time (hour,

minute, second) is shown.

Recording/playback mode time display

• Shows the recording/playback mode set with the [TIME

MODE] button.

• When a tape ends in the Record mode, the record time

mode indication goes out and the "End" indication

blinks (when the <REC REMAIN> menu switch is set

to "OFF"). If the <REC REMAIN> menu switch is set

to "180S" or "360S", the "End" indication blinks

3 minutes or 6 minutes before the tape ends.

• When an problem occurs, the error indication

“E-

∗∗”

blinks. For details, refer to page 43.

• During the index search by RS-232C Command, the

index number is indicated in 2 digits (00-99). During

the index search by FF/REW Button, the index number

indicates 01 and 00 only.

CAM SW

OUT

ALARM

COM

ALARM

REC OUT

SERIES/CLOCK

ALARM

RESET

TAPE

END OUT

WARNING

/REC

OUT

IN OUT

VIDEO

AUDIO

IN IN

OUT

REMOTE

MIC

CAM SW

OUT

ALARM

COM

ALARM

REC OUT

SERIES/CLOCK

ALARM

RESET

TAPE

END OUT

WARNING

/REC

OUT

IN OUT

2-1 FRONT PANEL

2-3 Rear Panel

2 CONTROLS AND CONNECTORS

Power cable

Connect the power plug to an AC 220-240 V, 50/60 Hz

outlet.

[MIC IN] mic input connector

Connect a microphone with 3.6-mm dia. plug. When

signals are input from both the microphone connector

and the audio input connector, audio signals are mixed

and recorded.

[VIDEO IN] video input connector (BNC)

Receives composite video signals from a connected

camera or other video source.

[AUDIO IN] audio input connector (RCA)

Receives audio signals from a connected audio source.

[AUDIO OUT] audio output connector (RCA)

Outputs audio signals.

[VIDEO OUT] video output connector (BNC)

Outputs composite video signals. Input camera signals

(composite video signals) can still be output through this

connector even when no power is supplied to the unit

(Power-Off Video Throughput function).

[REMOTE] remote connector (RCA)

Connect the optional RM-G30U remote control.

[SERIES/CLOCK OUT] series recording signal/clock

reset signal output terminal

Outputs the series recording signals or clock reset

signals.

Select the output signal with the <TERMINAL SEL 1>

menu switch.

• Series recording signal output

When the <TERMINAL SEL 1> menu switch is set to

“SERIES”, the series recording signal is output.

• Connect to the other VCR series recording signal input

terminal. When the tape being recorded in this unit

ends, a signal is output from this terminal to the

connected VCR.

• Select the signal output timing with the <REC

REMAIN> menu switch (tape end, or 3 minutes or 6

minutes before the tape ends).

• Clock reset signal output

When the <TERMINAL SEL 1> menu switch is set to

“C.ADJ”, the clock reset signal is output when the

internal clock is at AM0:00 and PM0:00. When

connected to the [CLOCK IN] terminal of another SR-

L910E/EK, this unit

’s time can be synchronised with

the time on the other VCR if the time difference is

within ±30 seconds.

Connecting the wires to the terminals

button

1. Hold the button down

and insert the wire

over the top of the

terminal.

2. Release the button to

lock the wire in the

terminal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC SR-L910EK Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info