Bedienungsanleitung JVC UX-G70 (Seite 40 von 47) (Englisch)

56308

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Playing Back from the PC:

• Check if your PC equipped with the CD-ROM drive is

running on Windows

98*, Windows

98SE*, Windows

Me*, Windows

2000*, or Windows

XP* and prepare its

CD-ROM.

*Microsoft

, Windows

98, Windows

98SE, Windows

Me, Windows

2000 and Windows

XP are registered

trademarks of Microsoft corporation.

• DO NOT turn off the System or disconnect the USB cable

while installing the drivers or until your PC has recognized

the System.

• Use a full speed USB cable (version 1.1).

• If your PC does not recognize the System, disconnect the

USB cable and connect it again. If this does not work,

restart Windows.

• The drivers installed can be recognized only when the USB

cable is connected between the System and your PC.

• The sound may not be played back correctly—interrupted

or degraded—due to your PC settings or PC specifications.

Daily Operations—Sound & Other Adjustments

(see pages 12 to 15)

Adjusting the Sound:

• This function also affects the sound through the

headphones.

Changing the Scanning Mode:

• You cannot change the scanning mode to progressive in the

following cases:

– When your TV does not support the progressive video

input.

– When you have not connected your TV to the system

using a component video cord.

Setting the Clock:

• “0:00” will flash on the display until you set the clock.

• The clock may gain or lose 1 to 2 minutes per month. If this

happens, reset the clock.

Advanced Radio Operations

(see pages 16 and 17)

• If you want to know more about Radio Data System, visit

«http://www.rds.org.uk».

• If the System takes time to show the Radio Data System

information—PS, PTY, RT signals, “WAIT PS,” “WAIT

PTY,” or “WAIT RT” will appear while searching.

Unique DVD/VCD Operations

(see pages 18 to 20)

Selecting the Audio Track:

• On some DVD Video discs, you cannot change audio

languages while playing back.

Special Effect Playback:

• During slow-motion playback, no sound will be

reproduced.

• While zoomed in, the picture may look coarse.

Advanced Disc Operations

(see pages 21 to 29)

Programming the Playing Order—Program Play:

• While programming steps...

– You cannot eject any discs from the disc trays.

– Your entry will be ignored if you have tried to program

an item number that does not exist (for example,

selecting track 14 on a disc that only has 12 tracks).

Playing Repeatedly:

• When DVD Video or DVD Audio is loaded in this System,

playback of the disc next to the DVD Video or DVD Audio

will not start, although /REPEAT ALL on the TV

screen or ALL in the display window is shown.

• A-B Repeat can be used within the same title while playing

a DVD Video, and within the same track for the other discs.

On-screen Disc Operations:

• For DVD-R/-RW in the VR format, “PG” or “PL” appears

instead of “TITLE” on the on-screen bar.

Operations on the Control Screen:

• If you press ON SCREEN on the remote control during

playback, playback information appears on the TV screen.

ALL

UX-G70[B].book Page 36 Monday, April 17, 2006 1:41 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC UX-G70 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC UX-G70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info