Bedienungsanleitung JVC UXH10 (Seite 20 von 26) (Englisch)

29936

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

IMPORTANT:

• It should be noted that it may be unlawful to re-record

pre-recorded tapes, records, or discs without the

consent of the owner of copyright in the sound or video

recording, broadcast or cable program and in any

literary, dramatic, musical, or artistic embodied

therein.

• The recording level is automatically set correctly, so it is

not affected by the other sound settings. Thus, during

recording you can adjust the sound you are actually

listening to without affecting the recording level.

• If recordings you have made have excessive noise or static,

the unit may be too close to a TV. Increase the distance

between the TV and the unit.

• You can only use type I tape for recording.

• DO NOT turn off the unit while playing back or

recording a tape.The cassette deck or tapes may

be damaged.

• DO NOT use type II and type IV tapes since the

unit is not compatible with such tapes.

• The use of C-120 or longer tape is not

recommended, since characteristic deterioration

may occur and this tape easily jams in the pinch

rollers and the capstans.

At the start and end of cassette tapes

There is leader tape which cannot be recorded onto. Thus, when

recording from discs, FM/AM broadcasts, or external equipment,

wind the leader tape first to ensure that the recording will be made

without losing any music.

To protect your recordings

Cassettes have two small tabs on the back to protect against

unexpected erasure or re-recording.

To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with

adhesive tape.

Recording

Adhesive tape

Recording from the Radio

On the unit ONLY:

Put a recordable cassette in with the exposed

part of the tape down.

• See also page 16.

Close the cassette holder gently.

Press TUNER/BAND to select either

“FM” or “AM.”

• When recording from discs, see “Recording

Discs—Disc Synchronized Recording” on page

18.

Tune in to the station you

want to record.

Press ‡ (recording).

‡ and # lock down, and the recording starts.

You cannot press ‡ in the following cases:

• If no cassette is inserted.

• If a protected tape is inserted.

To stop recording for a moment, press *

(pause).

To resume recording, press * again.

To stop recording, press &/).

To remove the cassette, press &/) while

recording is stopped.

To record an AM (MW) station—Beat Cut

On the remote control ONLY:

While recording an AM (MW) broadcast, beats

may be heard (which are never heard when

listening to the broadcast without recording it).

If this occurs, press BEAT CUT repeatedly, while

recording, until the beats are reduced.

• Each time you press the button, the display changes

alternates “BEAT 01” and “BEAT 02.”

BEAT CUT

TUNER

BAND

UX-H10[B]_rec.p65 03.5.15, 4:30 PM17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC UXH10 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info