Bedienungsanleitung JVC UXH330 (Seite 22 von 32) (Englisch)

29944

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Start playing the source—FM, AM (MW), or

auxiliary equipment connected to AUX jack.

• When the source is FM or AM (MW), tune in to the

station you want to record.

• When recording from discs, see “Recording Discs—

Disc Synchronized Recording” on page 20.

Press REC (recording).

• The REC indicator appears and 3 indicator

lights up on the display.

Press TAPE ¤ ‹.

3 indicator starts flashing and the recording

starts.

• If no cassette is inserted when you press REC

“NO TAPE” appears on the display.

• If a protected tape is inserted when you press REC

“PROTECT” appears on the display.

To stop recording for a moment, press REC.

The recording is paused. To resume recording,

press TAPE ¤ ‹.

To stop recording, press 7.

The recording stops.

To remove the cassette, press PUSH OPEN

while recording is stopped.

To record on both sides—Reverse Mode

On the remote control ONLY:

Press REV.MODE (reverse mode) until

or is lit.

• When using the Reverse Mode for recording,

lights up and start recording in the forward

( 3 ) direction first.

To cancel the Reverse Mode, press REV.MODE repeatedly

until is lit.

To reduce the beat—Beat Cut

On the remote control ONLY:

If the beats are heard while recording an AM

(MW) broadcast, press BEAT CUT repeatedly

until the beats are reduced.

• Each time you press the button, the display

alternates between “CUT-1” and “CUT-2.”

IMPORTANT:

• It should be noted that it may be unlawful to re-record

pre-recorded tapes, records, or discs without the

consent of the owner of copyright in the sound or video

recording, broadcast or cable program and in any

literary, dramatic, musical, or artistic embodied

therein.

• The recording level is automatically set correctly, so it is

not affected by the other sound settings. Thus, during

recording you can adjust the sound you are actually

listening to without affecting the recording level.

• If recordings you have made have excessive noise or static,

the unit may be too close to a TV. Increase the distance

between the TV and the unit.

• You can only use type I tape for recording.

• DO NOT turn off the unit while playing back or

recording a tape. The cassette deck or tapes

may be damaged.

• DO NOT use type II and type IV tapes since the

unit is not compatible with such tapes.

• The use of C-120 or longer tape is not

recommended, since characteristic deterioration

may occur and this tape easily jams in the pinch

rollers and the capstans.

At the start and end of cassette tapes

There is leader tape which cannot be recorded onto. Thus, when

recording from discs, FM/AM (MW) broadcasts, or external

equipment, wind the leader tape first to ensure that the recording

will be made without losing any music.

To protect your recordings

Cassettes have two small tabs on the back to protect against

unexpected erasure or re-recording.

To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with

adhesive tape.

Recording

Adhesive tape

Recording on a Tape

On the unit ONLY:

Put a recordable cassette in with the exposed

part of the tape down.

• See also page 14.

Close the cassette holder gently.

REC

PUSH OPEN

REV.MODE

MHz

REC

DOWN

4 7 ¢

TAPE

BEAT CUT

19-20_UX-H330&H300[B]3.p65 04.3.17, 0:02 PM19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC UXH330 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info