Bedienungsanleitung JVC UXJ50 (Seite 23 von 32) (Englisch)

29869

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Recording

Recording on a Tape

On the unit ONLY:

Put a recordable cassette in with the

exposed part of the tape down.

Close the cassette holder gently and check

the recording direction for the tape.

• If the tape direction is not correct, press TAPE 2 3

twice then 7 to change the tape direction.

• If you want to record on both sides of a tape, see “To

record on both sides—Reverse Mode.”

Start playing the source—FM, AM (MW) or

auxiliary equipment connected to AUX

jacks.

• When the source is the CD player, see “Disc Direct

Recording” on page 21.

Press REC (recording).

The REC (recording) indicator lights up on

the display and recording starts.

• If no cassette is inserted when you press REC

“NO REC” appears on the display.

• If a protected tape is inserted when you press REC

“NO REC” appears on the display.

To stop while recording, press 7.

To remove the cassette, press PUSH OPEN 0

on the unit.

• If the tape is recording, stop it first.

DO NOT open the cassette holder when the tape is

running.

To record on both sides—Reverse Mode

Press REV.MODE (reverse mode) repeatedly

until or is lit.

• When using the Reverse Mode for recording,

lights up and start recording in the forward

(3) direction first. Otherwise, recording will stop when

recording is done only on one side (reverse) of the tape.

IMPORTANT:

• It should be noted that it may be unlawful to re-record

pre-recorded tapes, records, or discs without the

consent of the owner of copyright in the sound or video

recording, broadcast or cable program and in any

literary, dramatic, musical, or artistic embodied

therein.

• The recording level is automatically set correctly, so it is

not affected by the other sound settings. Thus, during

recording you can adjust the sound you are actually

listening to without affecting the recording level.

• If recordings you have made have excessive noise or static,

the unit may be too close to a TV. Increase the distance

between the TV and the unit.

• You can use type I tape for recording.

To protect your recording

Cassettes have two small tabs

on the back to protect from

unexpected erasure or re-

recording.

To protect your recording,

remove these tabs.

To re-record on a protected tape, cover the holes with

adhesive tape.

To keep the best recording and playback sound quality

If the heads, capstans, and pinch rollers of the cassette deck

become dirty, the following will occur:

• Impaired sound quality

• Discontinuous sound

• Fading

• Incomplete erasure

• Difficulty in recording

To clean the heads, capstans, and pinch rollers

Use a cotton swab moistened with alcohol.

To demagnetize the heads

Turn off the unit, and use a head demagnetizer (available at

electronics and audio shops).

At the start and end of cassette tapes

There is leader tape which cannot be recorded onto. Thus, when

recording discs or radio broadcasts, wind the leader tape first to

ensure that the recording will be made without any loss.

Heads

Capstans

Pinch Rollers

REV.

MODE

REC

Continued

EN20-26_UX-J60&50[B]f.pm6 02.12.23, 9:34 AM20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC UXJ50 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info