Bedienungsanleitung JVC UXJ60 (Seite 26 von 32) (Englisch)

29871

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Press UP or DOWN to set the volume level,

then press CLOCK/TIMER.

• You can select the volume level (“VOLUME – –” and

“VOLUME 0” to “VOLUME 40”).

If you select “VOLUME – –,” the volume is set to the

previous level when the unit was turned off.

• To turn off the volume while the Recording Timer

(

REC

TUNER) is working, set the volume level

“VOLUME 0.”

The unit enters the clock setting mode.

Adjust the clock if you need.

• See “Setting the Clock” on page 9.

Press STANDBY/ON to turn

off the unit (standby) if you have

set the timer with the unit turned

on.

• When the timer turns on the unit, the (timer) and

the selected timer mode indicators (DAILY or REC)

start flashing.

To deactivate the timer temporarily, press

and hold CLOCK/TIMER until the (timer)

indicator on the display goes off.

To activate or change the timer (with the previous

setting), follow steps

on pages 22 and 23.

• If you want to change the timer setting after the Daily

Timer be used, first deactivate the timer.

• If the unit is turned on when the timer on-time comes

Timer does not work.

• When you unplug the AC power cord or if a power failure

occurs

The timer will be canceled. You need to set the clock first, then

the timer again.

Using Sleep Timer

With the Sleep Timer, you can fall asleep to music. You can

set the Sleep Timer when the unit is turned on.

How the Sleep Timer actually works

The unit automatically turns off after the specified time

length passes.

On the remote control ONLY:

Press SLEEP.

The time length until the shut-off time appears

and the SLEEP indicator lights up on the

display.

• Each time you press the button, the time length

changes as follows:

Wait for about 5 seconds after specifying

the time length.

The illumination and display dim.

To check the remaining time until the shut-off time, press

SLEEP once so that the remaining time until the shut-off time

appears for about 5 seconds.

• The illumination and display brighten during this period.

To change the shut-off time, press SLEEP repeatedly until

the desired time length appears on the display.

To cancel the setting, press SLEEP repeatedly until the

SLEEP indicator goes off.

• The Sleep Timer is also canceled when you turn off the

unit.

• If you set the Sleep Timer after the Daily Timer starts playing

the selected source

The Daily Timer is canceled. When the Sleep Timer shut-off time

comes, the unit will be turned off.

• If you set the Sleep Timer after the Recording Timer starts

recording

The Recording Timer is canceled, but recording continues until

the Sleep Timer shuts off the power.

STANDBY/ON

CLOCK

/TIMER

SLEEP

SLEEP 10

Canceled

SLEEP 20 SLEEP 30

SLEEP 60

SLEEP 90SLEEP120

EN20-26_UX-J60&50[B]f.pm6 02.12.23, 9:35 AM23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC UXJ60 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info