Bedienungsanleitung JVC UXMD9000R (Seite 18 von 33) (Englisch)

29873

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

English

Search Play ————————————

Holding down the 4 or ¢ button, during playback, will fast for-

ward/backwards the MD so you can quickly find a particular pas-

sage in the track you are listening to.

You can program the playing order of the tracks using the Remote

Control.

■ You can program up to 32 tracks in any desired order including

the same tracks.

■ You can only make a program when the MD Player is stopped.

■

1. Insert an MD.

■

2. Press the MD

button.

■

3. Press the

button to stop the MD.

■

4. Press the PROGRAM button.

The System enters the programming mode and the "MD PRO-

GRAM" indicator lights up.

■

5. Press the UP, DOWN, >, or < button to

select the track to program.

UP button: Increases the track number by 1.

DOWN button: Decreases the track number by 1.

> button: Increases the tenth digit of the track number.

button: Decreases the tenth digit of the track number.

• Example: for track 2, press the UP button twice. For track 12,

press the > button, then press the UP button twice (or simply

press the UP button 12 times).

■

6. Press the SET button.

■

7. Repeat steps 5 and 6 to select the other

tracks for the program.

You can see the total playback time of programmed tracks on

the display. Also, you can see the programmed tracks on the

music calender.

■

8. Press the MD

button.

The System plays the tracks in the order you have programmed

them.

■ You can skip to a particular program track by pressing the 4

or ¢ button during Program Play.

■ To stop playing, press the 7 button.

To confirm the programmed tracks while the MD Player is

stopped, press the 4 or ¢ button; the tracks making up the

program will successively be displayed in the programmed order.

To delete all the tracks in the program, press the

7 button re-

peatedly until all the tracks are cleared. Turning off the power or

pressing the MD

0 button to eject the MD will also clear the pro-

grammed tracks.

To exit the program mode once, while the MD Player is

stopped, press the PROGRAM button to light off the "MD PRO-

GRAM" indicator.

Note: If the total playback time of the programmed tracks exceeds

150 minutes, the total playback time will go out on the dis-

play.

To Modify the Program ———————

Modify the contents of the program while the MD Player is stopped.

Each time you press the

7 button, the last track in the program is de-

leted. To add new tracks to the end of the program, repeat above

steps 5 to 7.

The tracks will play in no special order when you use this mode.

■

1. Press the RANDOM button on the Remote

Control.

The "MD RANDOM" indicator lights up on the display.

■

2. Press the MD

button.

The tracks are played in random order.

To skip a track during playback, press the ¢ button to jump

to the next track in the random sequence. Press the

4 button to

jump back to the start of a track being played.

To exit Random Play mode, press the RANDOM button to light

off the “MD RANDOM” indicator and carry out Normal Play or

Program Play, or press the MD

0 button to eject the MD.

You can set the program or individual track playing to repeat as

many times as you like.

Press the REPEAT button on the Remote Control.

The Repeat indicator changes with each press of the button, as

shown below.

= ALL= blank display = (back to the beginning)

: Repeats one track.

ALL : In Normal Play mode, repeats all the tracks.

In Program Play mode, repeats all the tracks in the

program.

In Random Play mode, repeats all the tracks in ran-

dom order.

To exit Repeat mode, press the REPEAT button until the Repeat

indicator on the display goes out.

■ In Random Play, as a matter of course, cannot be selected.

■ Repeat mode remains on the display even when you change the

play mode.

Programming the

Playing Order of the Tracks

PROGRAM

DOWN

SET

Program order number

Total playback time of the

programmed tracks

(After 2 seconds)

Random Play

Repeating Tracks

Ux-MD9000-e.fm Page 14 Tuesday, June 23, 1998 9:38 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC UXMD9000R Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info