Bedienungsanleitung JVC XLFZ158BK (Seite 14 von 20) (Englisch)

29168

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Page 12

GENERAL INFORMATIONS

COMPU LINK remote

control system

Automatic source selection

When the supplied COMPU LINK cord is utilized to connect this unit to

others equipped with COMPU LINK jacks, switching-in of each system

component can be performed with a single touch on the source

selector button located on a JVC amplifier or receiver.

When selection is carried out in this manner, the corresponding unit will

automatically start operation.

Upon pressing of the play button, the source selector of the amplifier

or receiver changes automatically. When a new unit is switched in, the

previously selected component stops operation within five seconds.

Synchronized recording

Synchronized recording refers to the process in which a JVC cassette

deck starts recording, synchronized with this unit. Synchronized

recording is carried out as follows:

1. Set the cassette deck to the recording pause mode in accordance

with its instructions.

2. To record only certain tracks, program the tracks in any order, as

desired.

3. Press the 3 PLAY/8 PAUSE button on the front panel of this unit.

The cassette deck automatically starts recording, synchronized

with this unit.

Notes

Synchronized recording stops automatically when this unit stops

playback.

To cancel synchronized recording, press the stop button of this unit

or the cassette deck.

To properly operate the synchronized recording, the buttons/con-

trols other than POWER,

STOP and OPEN do not function.

If the recording pause mode is set on the cassette deck by pressing

the

PAUSE button after pressing the

REC and

PLAY buttons

simultaneously, synchronized recording is not possible. For details,

refer to the instructions for the cassette deck.

Automatic power on/off function

This function is to control the power on/off of the receiver/amplifier or

this unit respectively as the following.

÷ When this unit enters playback mode, the power of the receiver or

amplifier is turned on.

÷ When the source selector of the receiver/amplifier is set to CD

function mode, the power of this unit is turned on.

Notes

Abnormal operation may result if the power supply of the component(s)

is interrupted. If this happens, you must start over again.

Ensure that the COMPU LINK jacks of the each component are

connected with the supplied COMPU LINK cord. Also, be sure to

fully read the instructions for each component.

When the power of the amplifier or receiver is switched off, this unit

is also turned off automatically.

The COMPU LINK Remote Control System controls relative

operations between components automatically and facilitates

various operations.

This is a system originated and developed by JVC for facilitating

various system operations.

The following is a brief explanation of this system:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC XLFZ158BK Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info