1
DVD PLAYER
XV-N330B
XV-N332S
INSTRUCTIONS
©2006 Victor Company of Japan, Limited
Warnings, Cautions and Others
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
3. The mains plug shall remain readily operable.
Caution –– STANDBY/ON button!
Disconnect the mains plug to shut the power off
completely. The STANDBY/ON button in any
position
can be remote controlled.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do
user serviceable parts inside the unit; leave all
servicing to qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser
radiation
directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE THE UNIT.
5. This
for laser products.
GNT0068-005A[EK]
EN 0206KTC-MW-SC
Region code of DVD VIDEO
This player can play back DVD VIDEO discs
whose region code numbers include “2.”
Examples of playable DVD VIDEO discs:
The player’s region code is printed on the rear of
the player
Note of Color system format
This player accommodates the PAL system, and
also can play back discs recorded with NTSC
system. (NTSC video signals are converted to a
PAL signal and output.)
Supplied accessories
If anything is missing, consult your dealer
immediately.
• Remote
• R6(SUM-3)/AA(15F)
VIDEO
®
ALL
2
5
4
2
3
1
231
564
Information
[European Union Only]
This symbol indicates that product with this symbol
should not be disposed as general household
waste.If you want to dispose of this equipment,
please do not use the ordinary dust bin! There is a
separate collection System for these products.
2
CAUTION:
• Do
ventilation
or cloth, etc., the heat may not be able to get out.)
• Do
candles, on the apparatus.
• When
must be considered and local rules or laws governing
the
• Do
or
as vases, shall be placed on the apparatus.
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect
from damage, locate the apparatus as follows:
Front: No obstructions and open spacing.
Sides: No obstructions in 3 cm from the sides.
Top: No obstructions in 5 cm from the top.
Back: No obstructions in 15 cm from the back.
Bottom: No obstructions, place on the level surface.
Precautions
Notes on the power cord
• When
period of time, remove the plug from the wall outlet. A
small
the power cord is connected to the wall outlet.
• When
always pull the plug, not the power cord.
• Do
• Disconnect
player or moving the player.
• Do
anything heavy on it, which may cause fire, electric
shock, or other accidents.
• If
power cord replaced with a new one.
Avoid moisture, water, dust, and high temperatures
• Do
• If
remove the plug from the wall outlet, then consult
your dealer.
a fire or electrical shock.
• Do
near a heating device.
Notes on installation
• Select
nor too cold between 5˚C and 35˚C.
• Leave
• Do
• Do
To prevent malfunction of the player
• There
anything goes wrong, unplug the power cord and
consult your dealer.
• Do
hairpins, coins, etc. into the player.
• Do
damage the player.
To clean the cabinet
• Use
the use of chemically-coated cloths.
• Do
and disinfectants. These may cause deformation or
discoloring.
Playable discs
• DVD VIDEO, Audio CD, Video CD, SVCD
• DVD-R/-RW,
VIDEO format
• CD-R/RW
format
• CD-R/RW
the “ISO 9660” format
Supported Digital audio formats:
Linear PCM, MPEG Multichannel, Dolby Digital, DTS (Digital
Theater Systems)*
NOTES
• If
disc characteristics or recording conditions, the
player may not be able to play back such discs.
• The
MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.
• With
* To
encoded Audio CD discs correctly, connect the
player to an amplifier with a built-in DTS decoder.
Otherwise, playback sound will be distorted.
Unplayable discs
If you try to play back discs listed below, noise may be
generated and causes damage to speakers.
• DVD-R/-RW written in the VR format
• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,
PHOTO CD, SACD
• Unfinalized discs
• Discs of irregular shape or discs with tape, seals or
paste on either the label side or playback side.
Playing back these discs may damage the player.
The
the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
XV-N330B/XV-N332S
Wall or
obstructions
Floor
Spacing 15 cm or more
Stand height
5 cm or more
Front
VIDEO
4
Connecting to a TV with component jacks
To
Interlace,
for a few seconds.
NOTES
• Connect
[CONNECTIONS] to [VIDEO COMPONENT] before
connecting with component jacks. (See
“CONNECTIONS” in “Initial settings.”)
• Connect
B” to “P B(C B),”“P R” to “P R(C R)”
correctly.
• The
(Y, P
B, P R) jacks cannot be used at the same time.
About the scanning mode indicator
NOTE
Some progressive TV and High-Definition TV sets are
not fully compatible with the player. To check the
compatibility of your TV, contact your local JVC
customer service center.
Connecting to a stereo audio amplifier (receiver)
Connecting to a digital audio device
To enjoy high-quality surround sound, connect the
DIGITAL
decoder or an amplifier with a built-in decoder.
NOTES
• Depending
from the DIGITAL OUT. Make an analog connection
in this case.
• Set
preference display correctly according to the
connected digital audio equipment. (See “DIGITAL
AUDIO OUTPUT” in “Initial settings.”)
[PICTURE
the PICTURE menu
Source type of DVD VIDEO
Film source Video source
AUTO [DDP] [P]
FILM [DDP] [DDP]
VIDEO(NORMAL)/
(ACTIVE)
[P] [P]
IAL
LEFT
RIGHT
REAM
L OUT
AUDIO OUT
VIDEO OUT
VIDEO
P
R
P
B
Y
To component
video input
To analog
audio input
LEFT
RIGHT
AUDIO OUT
VIDEO OUT
VIDEO
P
R
Y
P
B
To analog audio input
COAXIAL
LEFT
RIGHT
PCM/STREAM
DIGITAL OUT
AUDIO OUT
VIDEO OUT
VIDEO
P
R
Y
P
B
To digital audio input
To analog
audio input
3
Connections
Before making connections:
• Do not connect the AC power cord until all other connections have been made.
• Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the
player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.
Connecting to a TV with SCART connector
Connecting to a TV with composite jacks
AV OUT
IN
IN
IGH
T
EF
T
UDI
O
R
L
A
VIDE
O
S-VIDEO
SCART cable
(not supplied)
NOTE
The VIDEO jack, AV OUT terminal, and
component (Y, PB , PR ) jacks cannot be
used at the same time.
TV
The player
VIDEO
P
B
P
R
Y
COAXIA
L
PCM
/STREAM
DIGIT
AL OU
T
AUDI
O O
UT
VIDE
O O
UT
RIGHT
LEFT
RIG
H
T
LEF
T
AUD
IO
VIDEO
IN
NOTES
• If
instead
cable which converts stereo audio
output to monaural.
• The
component (Y, PB , R ) jacks cannot be
used at the same time.
Audio/video cable
(not supplied)
White
Red
TV
The player
Yellow
5
Turning on the power
Inserting the AC power plug
After all other connections have been made, insert the
AC power plug to the wall outlet firmly.
Installing
Open the compartment cover, and place the two
supplied R6(SUM-3)/AA(15F) batteries in the remote
control
inside the compartment. Then replace the cover.
The
If the functions of the remote control become erratic,
replace the batteries.
Precautions of the safe use of batteries
Observe the following precautions for the safe use of
batteries. If they are used improperly their lives will be
shortened, they may burst or their contents may leak.
• Remove
not going to be used for a long period of time.
• Remove
properly.
• Never
apart, mix them with other refuse, or throw them into
an incinerator.
• Never
• Do
different types, when placing them.
Turning on and off the player
Press STANDBY/ON.
Initial setup
When you turn on the player for the first time after
purchase, the following message appears on the TV
screen.
Before enjoying this player, make the initial settings as
follows:
1 Press ENTER.
2
Press 5 /∞ to select the on-screen language for
the preference displays, etc., then press ENTER.
3
Press 5 /∞
ENTER.
• For “4:3
“4:3 PS. ” (See “MONITOR TYPE” in “Initial
settings.”)
• For “16:9. ”
4 Press 5 /∞ to select a desired digital output
signal type, then press ENTER.
Set
receiver or decoder.
(If you do not connect the player to such a device,
press ENTER to finish the setting.)
• Receiver/decoder
no DTS, select “DOLBY DIGITAL/PCM .”
• Receiver/decoder
DTS logos, select “STREAM/PCM .”
• Receiver/decoder
DTS “PCM . ”
To bring up the DVD PLAYER SETUP display later
Press
SETUP display appears.
EXECUTE
SETTING
YES - PRESS ENTER NO - PRESS CANCEL
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
ENGLISH
ON SCREEN LANGUAGE
ENGLISH
DVD PLAYER SETUP
ENGLISH
FRENCH
GERMAN
MONITOR TYPE
4:3 L.B.
PICTURE SOURCE
AUTO
SCREEN SAVER
CONNECTIONS
ON
BACKGROUND
ST
SCART RGB
ANDARD
DVD PLAYER SETUP
16:9
4:3 LB
4:3 PS
DIGITAL AUDIO OUTPUT
DOLBY DIGITAL/PCM
ANALOG DOWNMIX
DOLBY PROLOGIC
D.RANGE CONTROL
ON
OUTPUT LEVEL
DVD PLAYER SETUP
PCM ONL
DOLBY DIGITAL/PCM
STREAM/PCM
STANDARD
8
Advanced Operations
OPEN/
CLOSE
LIST
SET UP
CLEAR
– SLOW
+
DISPLAY ON SCREEN
ENTER
ST
VFP
I/P
CANCEL RETURN
SOUND
EFFECT
TITLE/
GROUP DIMMER
AUDIO
SUBTITLE
SLIDE EFFECT
ZOOM
123
456
789
0
THUMBNAIL/
TOP
MENU
MENU
NEXT
SELECT
Changing the language, sound
and scene angle
1 Press the button.
2 Press the button repeatedly or
5/ ∞ to select the desired item.
3 Press ENTER to finish the
setting.
Buttons To do
AUDIO For DVD Video:
select audio languages.
For SVCD/VCD:
select the audio
channel.
SUBTITLE select the subtitle.
ANGLE select the view-angle.
Changing the picture tone (VFP)
The VFP (Video Fine Processor)
function allows you to adjust the
picture character according to the
type of programming, picture tone or
personal preferences.
1 Press VFP-I/P.
2 Press 2 /3 to select the desired
preset.
NORMAL For watching TV in a
general room.
CINEMA For watching a movie
software in a room with
suppressed light.
USER1
USER2
You can adjust
parameters that affect the
picture character and
store
preset. See below.
To adjust the picture tone
1 Select “USER1” or “USER2.”
2 Press 5 /∞ to select a parameter, then press ENTER.
3
Press 5 /∞ to adjust the parameter, then press ENTER.
4
Repeat step 2 and 3 to adjust other parameters.
5
Press VFP-I/P to finish the setting.
USER 1
BRIGHTNESS
GAMMA
CONTRAST
SA
SHARPNESS
Y DELA
+ 4
MID
+10
+10
LOW
+ 2
Selected
Preset
Parameter
GAMMA Adjust this if the neutral color is bright or dark.
The brightness of dark and bright portion is
maintained (LOW/MID/HIGH).
BRIGHTNESS Adjust this if the picture is bright or dark on the
whole (–16 (darkest) to +16 (brightest)).
CONTRAST Adjust
(–12 to +12).
SATURATION Adjust this if the picture is whitish or blackish
(–16 (blackest) to +16 (whitest)).
SHARPNESS*
Adjust
Y DELAY Adjust this if the picture looks separately/
overlapped (–2 to +2).
Changing the Sound Field
Each time you press SOUND
EFFECT, the Sound Effect mode
changes.
• As
Sound Effect works stronger.
Zooming the picture
Each time you press ZOOM , the
magnification changes.
• You 5/ ∞/ 2/ 3 button to
move the zoomed position.
To return to the normal playback,
select the normal size by pressing
ZOOM repeatedly.
* A
[CONNECTION] in the initial setting
to [VIDEO COMPONENT] or
[SCART S-VIDEO].
6
Basic Operations
With the label side up
Turning on and off the player
Insert a disc
1 Press 0 to open the disc tray.
2 Place a disc in the disc tray.
• To
recess.
3 Press 0 to close the disc tray.
Point toward the remote sensor
directly as
range is approx. 5 m.)
• Each
function/mode is activated, or corresponding
information is on the main display.
Main display
About On-screen guide icons
: P
: P
/ : Slow-motion playback with the current
speed.
/ : Fast forward/backward playback with the
current speed.
: At the beginning of a scene containing multi-
angle views.
: At the beginning of a scene containing multi-
audio sounds.
: At the beginning of a scene containing multi-
subtitles.
You can change the setting so that the on-screen
guide icons do not appear on the TV screen. (See
“ON SCREEN GUIDE” in “Initial settings.”)
When playing a disc with low quality recording
conditions or scratches
If
there
played back at all.
TRACK ADJUST function allows you to play back such
discs with better quality.
Each time you press TRACK ADJUST , the mode of the
function appears on the TV screen and changes as
follows:
TRACK ADJUST OFF = TRACK ADJUST
MODE 1 = TRACK ADJUST MODE 2
Select TRACK 1 or MODE
you better results
.
To return to the normal playback mode, select
TRACK
ADJUST OFF.
• Opening
• This
• If
ADJUST mode before you close the tray.
7
OPEN/
CLOSE
LIST
SET UP
CLEAR
– SLOW
+
DISPLAY ON SCREEN
ENTER
ST
VFP
I/P
CANCEL RETURN
SOUND
EFFECT
TITLE/
GROUP DIMMER
AUDIO
SUBTITLE
SLIDE EFFECT
ZOOM
123
456
789
0
THUMBN
AIL/
TOP
MENU
MENU
NEXT
SELECT
Basic playback
Buttons
To do
3* Start/resume
7 Stop
• When
RESUME, this player memorizes
the
interrupted playback.
– To resume playback, press 3 .
– To stop playback completely,
press 7 again.
8* Pause
• Each
the still
next frame.
¡/ 1 Fast forward/backward
(While paused)
Slow-motion playback
• Each
the playback speed changes.
¢/ 4 Skip chapter/track
• If
playback, playback is advanced/
reversed at 5 times normal speed.
VARIABLE
PLAYBACK
(For DVD Video)
You can change the playback
speed with the sound (except for
DTS) and subtitles.
To playback 1.2 or 1.5 times
faster, press VARIABLE
PLAYBACK on the player or ¡
on the remote control.
To playback 0.8 or 0.6 times
slower, press ¡ on the remote
control while playback is paused.
(For SVCD/VCD)
The disc is played back at about
2 times faster than normal.
(Only for DVD Video)
The
10 seconds before the current
position (only
* 38 on the player starts/pauses playback.
Changing the display brightness
Press DIMMER to change the brightness of the
display window.
Using the disc menu
You can operate a disc—SVCD/
VCD with Playback Control*
(PBC)—using the disc menu
shown on the TV screen.
*
for SVCD/VCD
menu.
7 For DVD
1 Press TOP MENU or MENU to show the disc menu.
2 Press 5 /∞ /2 /3 to select a desired item, then press
ENTER or 3 (SELECT).
• With
number using the numeric buttons.
7 For SVCD/VCD
1 While stopped, press TOP MENU or 3 (SELECT) to
show the menu.
2 Press the numeric buttons to select a desired item.
To select 5: press 5.
To select 23: press 2, then 3.
To select 40: press 4, then 0.
• To
press ¢ or 4 .
• To
To play back without PBC
While stopped, press the numeric buttons instead of 3
(SELECT) to start playback.
To reactivate PBC
• Press
• Press 7 to stop playback, then 3 (SELECT).
Turning on and off the player
Open/close the disc tray
Changing the display window
contents
Each time you press DISPLAY ,
the display window contents
changes.
Locating
or song
You can select a title/chapter/
track directly and start playback.
For DVD Video:
(While stopped) select title.
(While playing back) select
chapter.
For SVCD/VCD/CD:
Select track.
To select 5: press 5.
To select 23: press 2, then 3.
To select 40: press 4, then 0.
• If
before
can
chapter.
XV-N330B/N332S[EK]2.indd 1XV-N330B/N332S[EK]2.indd 1 2/15/06 3:16:47 PM2/15/06 3:16:47 PM
