Bedienungsanleitung JVC XVN3SL (Seite 8 von 36) (Englisch)

30469

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Basic

operati

ons

XV-N3SL/GNT0037-001A/English

Basic operations

Turning on/off the unit

Press STANDBY/ON on the remote control

unit or press STANDBY/ON on the front

panel.

The opening display appears on the TV screen, and the following

messages may appear at the bottom of the opening display.

• NOW READING (The unit is reading the disc information.)

• REGION CODE ERROR! (The region code of the DVD VIDEO

disc does not match the unit. The disc cannot be played back.)

• OPEN

•CLOSE

•NO DISC

NOTE

Even if you turn off the unit, the unit is not disconnected from the

AC power source as long as it is connected to the wall outlet. This

state is called standby mode. In this state, the unit consumes a

very small amount of power.

Initial setup

When you turn on the unit for the first time after purchase, the

following message appears on the TV screen.

You can set the display language, TV monitor type and digital

output before using the unit, by following the procedure below.

1 Press ENTER.

The first page of the DVD PLAYER SET UP display appears.

The pull-down menu of the [ON SCREEN LANGUAGE] is

already open.

2 Press 5/∞ to select the desired language.

You can select the on-screen language for the preference

displays, etc. from among ENGLISH, SPANISH and

FRENCH.

3 Press ENTER.

The second page is shown, in which the pull-down menu of

the [MONITOR TYPE] is already open.

4 Press 5/∞ to select the desired monitor type.

For a normal (conventional) TV, select [4:3 LB] or [4:3 PS].

For a wide-screen TV, select [16:9 NORMAL] or [16:9 AUTO]

(see page 22) .

5 Press ENTER.

The third page is shown, in which the pull-down menu of the

[DIGITAL AUDIO OUTPUT] is already open.

About invalid operation icon

When you press a button, and if the unit does not accept its

operation, appears on your TV screen. Operations are

occasionally unacceptable even if is not displayed.

Note that some operations may not be accepted. For example,

some discs may not allow rapid advance/reverse or slow-

motion playback.

STANDBY/ON

730

STANDBY/

ENTERCHOICE

ANGLE

5/∞/2/3

NOW READING

Message area

EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO

SETTING

YES - PRESS ENTER NO - CANCEL

SELECT

USE 5∞23 TO SELECT, USE ENTER TO CONFIRM

MENU LANGUAGE

ENGLISH

AUDIO LANGUAGE

ENGLISH

SUBTITLE

OFF

ON SCREEN LANGUAGE

ENGLISH

DVD PLAYER SET UP

ENGLISH

SPANISH

FRENCH

ON SCREEN LANGUAGE options

SELECT

USE 5∞23 TO SELECT, USE ENTER TO CONFIRM

MONITOR TYPE

4:3 L.B.

PICTURE SOURCE

AUTO

SCREEN SAVER

DVD PLAYER SET UP

16:9 NORMAL

16:9 AUTO

4:3 LB

4:3 PS

MONITOR TYPE options

SELECT

USE 5∞23 TO SELECT, USE ENTER TO CONFIRM

DIGITAL AUDIO OUTPUT

DOLBY DIGITAL/PCM

ANALOG DOWN MIX

DOLBY PROLOGIC

D RANGE CONTROL

OUTPUT LEVEL

DVD PLAYER SET UP

PCM ONLY

DOLBY DIGITAL/PCM

STREAM/PCM

DIGITAL AUDIO OUTPUT options

XV-N3SL(J).book Page 6 Friday, June 27, 2003 9:41 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC XVN3SL Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info