Bedienungsanleitung JVC XVN3SL (Seite 18 von 36) (Englisch)

30469

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Advanced operations

XV-N3SL/GNT0037-001A/English

Advan

ced

ope

rations

Special picture/sound effect

To zoom in pictures

1 During playback or while paused, press

ZOOM.

Pressing ZOOM causes the unit to zoom in on the image.

At the top left of the screen, the information for the current

magnification appears for about 5 seconds.

Each time you press ZOOM, the magnification is doubled (up

to 64 times).

When a picture of a DVD VIDEO disc is viewed on a normal

TV screen (4:3, Letter Box), black bars may appear at the top

and bottom of the screen. In this case, if you select the

“ZOOM × 1.8” mode, the black bars become almost invisible.

When a 1:2.35 or 1:1.85 DVD VIDEO source is played back,

however, the black bars are visible on the screen.

2 Press 5/∞/2/3 to move the zoomed position.

To return to the normal playback

Press ENTER.

NOTE

While zoomed, the picture may look coarse.

To adjust the picture character (VFP)

The VFP (Video Fine Processor) function allows you to adjust the

picture character according to the type of programming, picture

tone or personal preferences.

1 During playback, press VFP.

The VFP mode selection window appears on the TV screen.

2 Press 2/3 to select the desired preset.

Each time you press the button, the VFP mode changes as

follows.

Set the video type most suitable to the current program or the

room conditions.

[NORMAL]: for watching TV in a general room.

[CINEMA]: for watching a movie software in a room with

suppressed light.

[USER 1] [USER 2]: you can adjust parameters that affect

the picture character and store the settings as a user

preset. See the next step.

3 To define a user setting, press 5/∞ to select a

parameter to be edited from the following.

• GAMMA

Adjust this if the neutral color is bright or dark. The

brightness of dark and bright portion is maintained.

Available range: –4 (darkest) to +4 (brightest)

• BRIGHTNESS

Adjust this if the picture is bright or dark on the whole.

Available range: –16 (darkest) to +16 (brightest)

• CONTRAST

Adjust this if the far and near position is unnatural.

Available range: –16 to +16

• SATURATION

Adjust this if the picture is whitish or blackish.

Available range: –16 (blackest) to +16 (whitest)

•TINT

Adjust this if the appearance of flesh tone is unnatural.

Available range: –16 to +16

• SHARPNESS

Adjust this if the picture is indistinct.

Available range: 0 to +3

•Y DELAY

Adjust this if the picture looks separately/overlapped.

Available range: –2 to +2

4 Press ENTER.

A window for setting parameters appears.

5 Press 5/∞ to adjust the level of the

parameter.

The higher value enhances the effect.

6 Press ENTER.

Repeat steps 3 to 6 if you want to set other parameters.

ENTER

ZOOM

3D PHONIC

VFP

ON SCREEN

5/∞/2/3

ZOOM x 4

NORMAL CINEMA USER 1 USER 2

USER 1

BRIGHTNESS

GAMMA

CONTRAST

SATURATION

TINT

SHARPNESS

Y DELAY

+ 4

+13

+ 3

+ 2

Selected preset

Parameter

SATURATION + 4

Selected parameter

XV-N3SL(J).book Page 16 Friday, June 27, 2003 9:41 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC XVN3SL Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info