Bedienungsanleitung JVC XVN3SL (Seite 25 von 36) (Englisch)

30469

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Changing the initial settings

XV-N3SL/GNT0037-001A/English

Changing the

initial settings

AUDIO menu

DIGITAL AUDIO OUTPUT

To connect the unit’s digital output to an external device equipped

with a digital input, this item must be set correctly.

See “Appendix C: Digital output signal chart” on page 30 for

details about the relation between the setting and output signals.

Setting options

PCM ONLY, DOLBY DIGITAL/PCM, STREAM/PCM

[PCM ONLY]: select when you connect the DIGITAL OUT jack of

the unit to the linear PCM digital input of other audio

equipment.

[DOLBY DIGITAL/PCM]: select when you connect the digital

input of a Dolby Digital decoder or an amplifier with a built-in

Dolby Digital decoder.

When this option is selected, playing back a disc recorded by

the MPEG Multichannel format outputs a linear PCM digital

signal.

[STREAM/PCM]: select when you connect the digital input of an

amplifier with a built-in DTS, MPEG Multichannel or Dolby

Digital decoder, or the stand-alone unit of such a decoder.

• With some DVD VIDEO discs that are not fully copy-protected,

a 20 or 24 bit digital signal may be output.

• A signal recorded with the 96 kHz or higher sampling frequency

is output from the DIGITAL OUT jack with the 48 kHz sampling

frequency.

• The unit does not provide the DTS decoding function.

• When playing a DVD VIDEO or Audio CD disc with DTS, use a

DTS decoder to get correct signals from your speakers.

• DTS-encoded signal is output only from the unit’s DIGITAL OUT

jacks.

• If the unit is not connected to audio equipment with a DTS

decoder, DTS-encoded signal output from the DIGITAL OUT

jacks is distorted.

ANALOG DOWN MIX

To correctly play the audio on a DVD VIDEO disc recorded with

surround multichannel audio, you must set this item properly

according to your audio system configuration.

(This function does not work when the 3D PHONIC function is

activated.)

Setting options

DOLBY SURROUND, STEREO

[DOLBY SURROUND]: select when listening to multichannel

surround audio with the unit’s analog AUDIO OUT terminals

connected to a surround decoder.

[STEREO]: select when listening to conventional two-channel

stereo audio with the unit’s AUDIO OUT terminals connected

to a stereo amplifier/receiver or television set, or in case you

want to record the audio from a DVD VIDEO disc to MiniDisc,

cassette, etc.

D. RANGE CONTROL

This setting provides optimal audio quality from the analog

AUDIO OUT terminals for listening to DVD VIDEO discs recorded

in Dolby Digital format, at low or middle volume.

Setting options

WIDE RANGE, NORMAL, TV MODE

[WIDE RANGE]: when selected, audio is played back with the

widest dynamic range so that you can enjoy powerful

playback sound.

[NORMAL]: normally, select this option.

[TV MODE]: select if DVD VIDEO disc sound level is lower than

TV program sound level. Thus you can hear sound at a lower

volume clearly.

OUTPUT LEVEL

This setting allows you to attenuate the level of the signal output

from the unit’s analog AUDIO OUT terminals.

Setting options

STANDARD, LOW

• If the sound output from the speaker is distorted, select [LOW].

OTHERS menu

RESUME

You can select the resume playback mode.

See pages 8 and 9 for details about the resume playback

function.

Setting options

ON, OFF, DISC RESUME

[ON]: when selected, the unit can resume playback of the disc

from the position where playback was last interrupted, if the

disc is still in the disc tray.

[OFF]: when selected, the resume function is deactivated.

[DISC RESUME]: when selected, the unit can resume playback

of the last 30 discs played. The unit retains a memory of the

interrupted positions of the last 30 discs played, even though

they have been removed from the disc tray.

ON SCREEN GUIDE

The unit can display “on-screen guide” icons or characters on the

picture, which show what is happening to the disc or the unit.

Example of “on-screen guide” icons: , ,

Setting options

ON, OFF

[ON]: when selected, the on-screen guide is activated.

AUTO STANDBY

When the unit is stopped for more than 30 minutes or 60 minutes,

the unit enters standby mode automatically.

Setting options

60, 30, OFF

PARENTAL LOCK

When this option is selected, pressing ENTER on the remote

control unit brings up the PARENTAL LOCK display shown below.

This allows you to restrict children from playing DVD VIDEO

discs.

• See page 24 for details about the parental lock setting.

SELECT

USE 5∞ TO SELECT, USE ENTER TO CONFIRM

TO EXIT, PRESS CHOICE.

SET LEVEL

NONE

PASSWORD

_ _ _ _

PARENTAL LOCK

EXIT

COUNTRY CODE

XV-N3SL(J).book Page 23 Friday, June 27, 2003 9:41 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC XVN3SL Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info