Bedienungsanleitung JVC XVN5SL (Seite 9 von 72) (Englisch)

30471

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Getting started

XV-N5SL/LET0204-001A/English

Connection to a TV equipped with component jacks

You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN

jacks of your TV with the video cables.

• Connect "Y" to "Y," "P

B" to "PB"(CB), "PR" to "PR"(CR) correctly.

The unit supports the Progressive scanning system (480p) as well as conventional Interlaced scanning system (480i).

If your television or monitor equipped with component jacks supports the progressive video input, you can enjoy a high

quality picture by making the Progressive scanning mode active.

• If your television equipped with component jacks does not support the progressive scanning mode

Set the Scan mode selector to "480i."

• If your television equipped with component jacks supports the progressive scanning mode

Set the Scan mode selector to "480p."

• If you want to select the scan mode between the interlace and progressive modes (depending on the source

condition, or when connecting more than one television etc.)

You can select the mode from the remote control unit. To do this, set the scan mode selector to "REMOTE."

(See "To make the Progressive scanning mode selection active from the remote control unit" on page 8 for details about

how to select the scanning mode from the remote control unit when the scan mode selector us set to "REMOTE.")

NOTES

• You must change the switch position on the rear panel while unit power is off. Otherwise, the changed setting is not effective.

• When the scan mode is set to the progressive mode, the PROGRESSIVE indicator on the front panel is lit. The color of the

indicator depending on the "PROGRESSIVE MODE" setting on the "PICTURE" preference display and the status of the unit (see

pages 8 and 51).

• When connecting to a TV using the VIDEO or S-VIDEO jack, make sure that the PROGRESSIVE indicator on the front panel is

not lit. If it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals. To turn off the PROGRESSIVE indicator, set the

scan mode selector on the rear panel to "480i." Or, while setting the scan mode selector to "REMOTE," make the Progressive

scanning mode inactive by following the procedure described on page 8.

• When the component video input jacks of the TV is the BNC type, use an adaptor to convert a pin jack to a BNC jack (optional).

• Make "ANALOG DOWN MIX" in the "AUDIO" preference to "STEREO" (see page 53).

• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio

output to monaural.

• To improve audio sound quality, connect the AUDIO OUT jacks to your separate audio equipment (see the following pages).

• If your TV has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See "AV COMPU LINK remote control

system" on page 60 for details.

VIDEO

AUDIO

RIGHT

LEFT

S-VIDEO

COMPONENT IN

COMPONENT

Green Red

Blue

Component video cable (supplied)

Audio cable (not supplied)

Green Red

Blue

Red White

White

Red

The unit

Scan mode selector

XV-N5SL(J).book Page 7 Wednesday, July 24, 2002 1:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC XVN5SL Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info