694542
20
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
20
desired “P” programme is displayed.
3. Wait until the home screen appears.
4.11 Activating/deactivating
the hybrid LED lighting and
adjusting the lighting intensity
If the gas fire is equipped with hybrid
LED lighting, it will be automatically ac-
tivated as soon as the fire is turned on.
The number of horizontal bars at the
bottom of the screen indicate the level
of brightness of the LED lights. LED
lighting can also be activated when the
fire is not on. Carry out the following
steps to activate only the LED lighting:
1. Press
to turn on the screen.
2. Press the right button until “P1, P2
or P3” appears in the centre of the
screen.
3. Press
to activate the LED ighting
or increase its intensity.
4. Press
to deactivate the LED
at identical switch-on times.
17. Press P to exit the programme.
18. The
and icons on the remote
control indicate that the time seg-
ments have been programmed.
4.10 Programme choice for the
hybrid LED lighting
If the gas fire is equipped with a hybrid
LED lighting function, it is possible to
vary the lighting effects. The different
parameters controlling the LED lighting
allow the oscillation, intensity and co-
lour to be set. In every programme, se-
lection of the word “AUTO” provides the
highest and clearest lighting intensity.
Carry out the following steps to adjust
the LED lighting programme:
1. Press the right button
until a “P1,
P2 or P3” appears in the middle of
the display.
2. Press
a number of times until the
Table: LED programme
Programme Reacts to Light clear variation
P1
Setting AUTO and Modulating
between high and low
10% to 90%, fading reddish LED
colour.
P2
Setting AUTO and Modulating
between high and low
10% to 90%, yellowish and reddish
LED colour, alternately on the
left and right-hand sides of the
appliance.
P3
Setting AUTO and Modulating
between high and low
Combination between Programme
P1 en P2
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kalfire GP80-55C wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kalfire GP80-55C

Kalfire GP80-55C Bedienungsanleitung - Deutsch - 44 seiten

Kalfire GP80-55C Bedienungsanleitung - Holländisch - 41 seiten

Kalfire GP80-55C Bedienungsanleitung - Französisch - 45 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info