694542
29
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
29
5.2.2 Error codes iMatch remote control
Error code Cause Solution
Entire
display
flashing
Flat battery Replacing battery.
Low battery Replacing battery.
NOLK 0 in
the middle
of the
display
Bedienings-
fout
Druk kort op >NOLK< zal nu linksboven in het display
verschijnen.
NOLK
linksboven
in het
display
No com-
munication
between
remote
control and
fireplace
(for example
in case of a
new remote
control)
Synchronising remote control:
1. Open the hatch of the technical unit and carefully
remove the automatic burner relay so it is easily
accessible.
2. Remove the batteries from the remote control and
press (hereby discharging the remote control). Next,
replace the batteries into the remote control.
3. Isolate the automatic burner relay from power for
20 seconds, this will stimulate the synchronisation
speed. Supply power back to the cable. The entire
light will start flashing (once per second). Should
the gas fire is provided with a hybrid function and/
or NSG: detach the HCB cable from the automatic
burner relay.
4. Press
on the remote control until >NOLK 0<
appears on the display.
Next, release
.
5. In case >NOLK 1< or >LINK 1< appear, press
again until
>NOLK 0< appears.
6. Press the black button in the automatic burner relay
until the yellow light continuously stops flashing, then
immediately release the black button. The yellow light
will start flashing rapidly now.
7. Immediately (within 10 seconds) press
and hold
it down until the word
>LINK<starts flashing on the
display.
8. Wait until >LINK 1< appears and release
.
9. Press
. The normal display with a stationary RF
icon
will appear once the synchronisation is
successful.
10. Reconnect the HCB cable (if applicable).
11. Place the automatic burner relay back into the
technical unit and close the hatch.
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kalfire GP80-55C wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kalfire GP80-55C

Kalfire GP80-55C Bedienungsanleitung - Deutsch - 44 seiten

Kalfire GP80-55C Bedienungsanleitung - Holländisch - 41 seiten

Kalfire GP80-55C Bedienungsanleitung - Französisch - 45 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info