Bedienungsanleitung Kalfire W66-48S (Seite 42 von 55) (Englisch)

694580

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

7 Maintenance

7.1 General instructions

•

Do not use steel brushes to clean a stainless steel flue duct.

Remove the bae plate before sweeping to remove the

soot and to ensure that the plate is not obstructing the

passage during sweeping.

•

Clean the space under the fireplace via the convection

grates at the base. A lot of dust can easily collect here,

conveyed by the convection current.

•

Make sure the cord in the lower frame is free of

ash and soiling.

•

If the cords no longer seal properly, they can be replaced.

Contact your Kalfire dealer for assistance.

•

Treat the chain in the lifting door system each year, by

spraying it with Kalfire lubrication.

•

The panel is made from special ceramic glass. This should

not be placed in the bottle bank. Ceramic glass does not

melt in the glass oven, so it will cause problems in the glass

oven. Your ceramic glass should be returned to your council

waste tip so it can be recycled appropriately.

•

Only use Kalfire spare parts as replacement parts (if

necessary). These parts can be obtained from your Kalfire

dealer.

7.2 Maintenance frequency

The wood burning fireplace should be inspected annually for

optimal, sustainable and safe use. Malfunctions to the wood

burning fireplace must be fixed instantly. Inform your client about

the possibilities of a maintenance contract.

7.3 Before and during the heating season

As time passes, tarnish can form on the inside of the glass. This

can be removed by using a moist cloth or non-scratching cleaning

detergent (ceramic glass cleaner). Do not use corrosive or

abrasive substances for cleaning the fireplace. Damage to enamel

is not included in the warranty. Small damaged can be removed

by using heat-resistant enamel. This enamel is available at Kalfire.

7.4 Keeping clean glass panes

•

In the case of an interior with steel slats or a design, the risk

of soiling the glass pane is greater than with the standard

(skamol) plates.

•

The Kalfire W80/52T, W105/47T and W53/50R models, as a

result of the relatively small surface skamol plates (which

provide the reflection), have a greater chance of dirtying

their glass pane.

•

Only burn dry wood.

•

Open the secondary air regulation completely.

•

Open the damper (if present) completely open.

•

Ensure the flue has a minimum draught of 12 Pa.

7.4.1 Cleaning ceramic panels

The first time it is used, afterwards as well, the glass of a wood-

burning fireplace can become dirty. Potential causes can be:

smoking materials in the fireplace (especially in the beginning),

air contamination, quality of the wood, etc.

•

Filth or stains on the glass must be removed immediately.

•

Never use the fireplace if the glass is filthy or stained. This

can lead to permanent and non-removable contamination.

•

Clean the glass after the burning a fire for the first time and

preferably after each use of the fireplace.

•

Use scratch-free cleaning substances only.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kalfire W66-48S Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kalfire W66-48S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info