Bedienungsanleitung Kalkhoff 2021 (Seite 43 von 70) (Englisch)

778421

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

Originalbetriebsanleitung Allgemein EN-43

24.3.2.5 Sram AXS: charging station and

USB cable

Fig. 80 Charging station and battery ©Sram

Charging the battery: To charge the shifter battery, proceed

as follows:

1. Connect the Micro USB plug to the Micro USB socket of

the charging station.

2. Connect the USB plug to the USB port of a computer.

3. Remove the battery cover from the battery. Keep the

battery cover for later use.

4. Insert the battery into the charging station. It can take

up to 5 seconds until the LED on the charging station

lights up. It will take approximately one hour for the

battery to charge completely.

Notice

If none of the LEDs light after 5 seconds, make sure

that the plug is completely inserted into the charge

socket, and that you are using a standard USB charging

connector (1 A and 5 V). If the LEDs still do not light

up, get in touch with your specialist workshop.

5. Push the button on the charging station to release the

battery.

6. Insert the completely charged battery into the rear/

front derailleur and close the battery holder. If the

battery is properly inserted, the latch will click into

place.

Fig. 81 Inserting the battery ©Sram

CHARGE indicator: A continuously lit blue LED indicates

that the charger is receiving sucient power. A ashing

blue LED indicates that the charger is not receiving optimal

amounts of power. The battery will still charge, but the

charging process will take longer. A yellow LED indicates

that the battery is charging. A green LED indicates that the

charging process is complete.

ERROR display: A red LED indicates that an error has

occurred. Proceed as follows:

▪Remove the battery from the charging station and

reinsert it, and remove and reinsert the charging plug.

If the LED still lights up red, the battery or charging

station may be faulty. Get in touch with your specialist

workshop.

24.3.3 Adjusting the rear and front derailleurs

24.3.3.1 Mechanical derailleur

If the chain rattles and no longer runs smoothly, it makes

sense to adjust the rear and front derailleurs. We will show

you how to do that below. Get in touch with your dealer if

you are unsure about any of these tasks.

Rear derailleur: setting the upper stop

7. Shift the chain to the smallest chainring and the

smallest sprocket using the control elements on the

handlebars.

8. The idler pulley must now be positioned exactly

beneath the smallest cog. The chain should therefore

be in a straight line. If this isn’t the case, its position

must be adjusted using the adjustment screw.

9. Turn the cable

adjustment screw

clockwise if the rear

derailleur needs to be

moved inward, or

anticlockwise if it

needs to be moved

outward. Count the

turns, so that you can

reverse this action if

you have turned the

wrong screw and the

rear derailleur has not

moved.

10. To check whether the

tensile stress is set

correctly, shift a couple

of gears up and down

again using the control element. The pedal crank must

be moving when you do this.

Fig. 82 Turning the upper

Adjustment screw

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kalkhoff 2021 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kalkhoff 2021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info