63
A
B
D
C
4.2.1 External gear mech OEM/OEM2
ThediagramsaboveshowtheexternalgearmechwiththecableroutingviathechainstayforusewiththeOEM2
axleplate andtheOEMaxleplate .A B
4.2.2Externalgear mechwithlongtorquearm
The diagrams above show the external gear mech in combination with the standard axle plate and the long torque arm.
When the external transfer box needs to be in the position shown in diagram , then the axle plate must be secured to
the inside of the long torque arm.
D
Mounting
64
321
4.3Aligning of the axle plate
To align (rotate) the axle plate, all axle plate screws (M4 25, Torx TX20) must first be removed. Rotate the axle plate
into the desired position and then reinsert the axle plate screws through the axle plate into the hub axle. Secure them
tightly (tightening torque: 3Nm/25in.lbs.).
To hold the axle in position (when removing the axle plate screws), use a 10mm wrench on the OEM and OEM2
versions or simply hold the long torque arm tightly on the standard axle plate versions (see fig. 1-3 below).
x
OEMaxleplate:Holdthesupport
blockwitha10mmwrenchwhile
loosening/tighteningtheaxleplate
screws.
Standardaxleplatewithlong
torquearm:Holdthetorquearm
tightlywhileloosening/tightening
theaxleplatescrews.
OEM2axleplate:Holdthefork
legcarefullywitha10mmwrench
whileloosening/tighteningtheaxle
platescrews.
Mounting
