Bedienungsanleitung Kalorik 11 (Seite 7 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

487426

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Copies of the I/B. Please reproduce them without any changes

except under special instruction from Team International BELGIUM.

The pages must be reproduced and folded in order to obtain a mini

booklet A5 (+/- 148.5 mm width x 210 mm height). When folding,

make sure you keep the good numbering when you turn the pages

of the I/B. Don’t change the page numbering. Keep the language

integrity.

EXC OFR 1 - 110310

Assembly page 7/32

Fax +32 2 359 95 50



 This radiator is filled with a precise quantity of special oil. Any repairs requiring the opening

of the oil container are to be made by the manufacturer or its authorized service agent.

They also should be contacted if oil is leaking.

 When scrapping the appliance, all regulations concerning the disposal of oil should be

followed.

(*)

Competent qualified electrician: after-sales department of the producer or importer or any

person who is qualified, approved and competent to perform this kind of repairs in order to

avoid all danger. In case of need you should return the appliance to this electrician.

CONNECTION TO THE MAINS SUPPLY

The radiator should only be connected to an earthed socket installed in accordance with the

regulations.

Make sure that the supply voltage corresponds with the voltage marked on the rating label

(230V (AC)) and the rated electric current is not lower than 10A.

This product complies with all binding CE-labelling directives.

ASSEMBLY

Before using the radiator for the first time, the wheels must be fitted to the unit and then

secured with the wing nuts provided.

• Turn the heater upside down.

• Position the two wheels base between the end fins.

• Attach them to the heater using the U-hook and wing nuts.

• Fasten the wing nuts.

• Turn the heater the right way around.

THE HEATER MUST NOT BE USED WITHOUT ITS WHEELS.

When the appliance is switched on for the first time, a slight smell may be emitted. Please

ensure sufficient ventilation.

OPERATION

1. Select the power with the power selector. It has 3 different positions:

I = reduced power

II = medium power

I+II = full power

2. Turn the thermostat clockwise to increase the temperature and anticlockwise to reduce it.

The pilot light will turn on indicating that the appliance is heating. During use, the pilot light

will come on and off. It will turn off as soon as the set temperature is reached.

3. If you want to switch off your appliance, turn off the two switches (thermostat knob to

“LOW” position and power selector to “0”), remove the plug from the power supply and

place it in its storage location. CAUTION: YOUR APPLIANCE WILL REMAIN HOT FOR A FEW

MINUTES.

4. To move your appliance, take it by its handle, raise it and roll it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kalorik 11 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info