Bedienungsanleitung Kalorik EKS 1001 (Seite 6 von 32) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch, Polnisch)

612225

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

TKG EKS 1001 - 120124

Assembly page 6/32

Fax +32 2 359 95 50

USE

Put the scales on an even and hard surface, for instance a table. Avoid soft surfaces.

Normal weighing

1) Press the “ON/OFF” key lightly with your finger. The scales will turn on and the LCD

display will show “HELO” for a few seconds and then “0” g, “0.000” lb, “0.00” oz or

“0.000” kg.

2) Put the object you want to weigh on the kitchen scale. The stabilized weight is

displayed.

3) Remove the object from the kitchen scale.

4) The scale turns off automatically after about 45 seconds. You can also switch the

scale off anytime by keeping the “ON/OFF/TARE” key pressed for two seconds.

Tare function

With the tare function you can measure only the content of a container without measuring the

weight of the container itself.

1) Press the “ON/OFF” key lightly with your finger. The scales will turn on and the LCD

display will show “HELO” for a few seconds and then “0” g, “0.000” lb, “0.00” oz or

“0.000” kg.

2) Put the empty container (for instance a bowl) on the weighing platform. The

stabilized weight is displayed.

3) Press the “TARE” key to reset the weight to "0". The weight of the container will now be

displayed as zero, even though it remains on the weighing platform.

4) Add the ingredients into the container and read the weight when the display is

stable. Only the weight of the ingredients in the container will be displayed.

5) If you have to weigh/add several ingredients one after another in the same

container, you can also use the tare function and in this way you will each time get

the exact weight of the ingredient you have added.

6) The scale turns off automatically if there is no action within 45 seconds. You can also

switch the scale off anytime by keeping the “ON/OFF/TARE” key pressed for two

seconds.

Overload indicator

If the symbol appears on the LCD screen, it means that the maximum weight

accepted by your scales is exceeded, please remove the object from the weighing platform in

order not to damage your scales.

Low battery indicator

If the symbol is displayed on the LCD screen, it means that the battery of your scales

should be replaced (see paragraph Before the first use).

Battery

If your appliance does not work properly, it is probably because the battery is discharged. In

that case, replace it with a new one of the same type (see paragraph Before the first use).

Please dispose of the old batteries in an environmentally friendly way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kalorik EKS 1001 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info