Bedienungsanleitung Kalorik KA CV 5 T (Seite 5 von 12) (Englisch, Spanisch)

491349

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

5 KA CV 5 T - 050422

Assembly page 5/12

Fax +32 2 359 95 50

CONNECTION TO THE MAINS SUPPLY

Caution: We cannot be held responsible for any damage due to the wrong use or the non-

observance of this instruction manual.

The convection heater should only be connected to an earthed socket installed in

accordance with the regulations. Make sure that the supply voltage corresponds with the

voltage marked on the rating label.

This product complies with CE-directives.

BEFORE THE FIRST USE

Before using the convection heater for the first time, you must either attach the feet to the

base of the unit or mount the appliance on the wall.

Floor-standing (see page 3)

Attach each foot underneath the appliance by tightening two screws provided in the holes

foreseen to this effect. Make sure to install the appliance at a minimum distance of 50 cm to

other objects or walls. Never operate the appliance in floor-standing mode without having

assembled its feet correctly.

Wall-mounting (see pictures page 3)

Caution:

- There should be a distance of at least 50 cm between the lower part of the appliance

and the floor. For further distance information, check the scheme on page 3.

- The feet must be removed before mounting the appliance on the wall.

- The plastic covers must be put on the cord storage parts in the shape of a semi-circle in

order to keep the appliance at a certain distance from the wall. See picture page 3.

1. Put the two wall-mounting brackets at a distance of 38 cm from each other as indicated

on the picture page 3.

2. Hold the brackets against the wall and mark a dot with a pencil in each hole of the

brackets.

3. Take the brackets off the wall and drill a hole on each dot you just marked.

4. Insert a plug in each hole you just drilled. Place the brackets facing the holes and attach

them in this position with the screws supplied.

5. Attach the appliance on the wall. To do so, hold it in such way that the slots are above the

brackets, then slide the appliance down in such way that the brackets enter in the slots of

the appliance.

OPERATION

When the appliance is switched on for the first time, a slight smell may be emitted. Please

ensure sufficient ventilation. This smell will disappear very quickly.

With the power switches you can regulate the heating intensity. The thermostat allows you to

keep a constant room temperature.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kalorik KA CV 5 T Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info