Bedienungsanleitung Kalorik TKG WSP 1001 (Seite 17 von 72) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch, Polnisch)

713638

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

TKG WSP 1001 - 140418

Assembly page 17/72

Fax +32 2 359 95 50

the separate cover close to the five inner ribs and let the bottom edge inside the inner

side of the square hole to make sure it is well sealed and there is no water leakage. Good

condition: the separate cover is inside the inner side of the square hole and close to the 5

ribs.

For a perfect finishing:

Slightly sweeping manually with a dry wiping cloth will allow you to remove all wet remaining

traces. Indeed, depending on the methodology of each user, a few residual traces of water

can remain, you just have to wipe them with a dry piece of linen, your windows will always be

clean and the traces of grease will be completely removed after the passage of your device.

An excessively dirty water in the tank can be at the origin of residual traces, after drying, it is

recommended to empty the water of the tank after each use and sometimes during the

cleaning of especially dirty surfaces.

The wiping cloths must also be regularly changed, depending on their dirt state.

Do not project spray to eyes with or without product, or on surfaces of electronic

components, such as plug, switch, cable, stereo equipment, computer screen, or household

appliances.

AFTER USE & MAINTENANCE

• Always unplug the appliance before cleaning.

• Cleaning the filter and the dust collector is extremely important as it allows the optimal use

of your appliance and eliminates the unpleasantness due to bad smells that can occur

after having vacuumed liquids or humid particles.

• Remove the dust collector by pressing the release button situated on top of the

appliance. We advise you to do this over a dust bin.

• Remove the filter unit in the dust collector as described above.

• Empty the dust compartment and clean it with soapy water if necessary.

• To clean the filter you can detach it from its holder. You can then take the filter and clean

it in soapsuds if necessary. If you use soapsuds, rinse the filter with clear water and let it dry

before putting it back into the appliance.

• Once the filter is clean and dry, put it back in its holder and reinsert the filter holder in the

dust collector. To do so, make sure the ribs in the dust compartment face the grooves

situated on the edge of the filter holder. The correct position of the filter holder is extremely

important, as it guarantees the tightness between the dust compartment and the motor.

• If the filter is too dirty or damaged, it must be replaced. To do so, please contact the

nearest customer service.

• After having replaced the filter, attach the dust compartment to the motor unit.

Inner rib

Inner side

of square

hole

Handle

Small screwdriver

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kalorik TKG WSP 1001 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info