Bedienungsanleitung Karcher A 2236 X (Seite 9 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

75888

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Deutsch 5

Î The filling level of the filter bag depends

on the dirt that is sucked in.

The filter bag needs to be replaced more

frequently while sucking in fine dust, sand,

etc.

Î Use a preliminary separator while sucking

in ash or rust particles (order no. 2.863-

139).

Illustration

Î Insert the hard surface inlay into the floor

nozzle. The bristles should point towards

the front.

Î Press both the locking flaps inwards.

Î Remove the hard-surface insert.

Use this function, for example, to blow out

leaves or dust from the garage, hobby room,

work shop, courtyard or garden.

Illustration

Î Connect connection hose. Open the slide

of the air regulation, and select the de-

sired blowing performance.

ṇ Caution:

Do not use a filter bag!

Immediately switch the appliance off if foam

forms or liquids escape!

Note: If the container is full a float closes the

suction opening and the appliance works at a

higher speed. Switch off the appliance imme-

diately and empty the container.

Further, for A 2236 X pt:

Illustration

Electric power tools with a power consump-

tion of 100-2100 W can be connected.

(CH: 100 - 1100 W, UK: 100 - 1800 W)

Î A) Plug the enclosed adapter onto the

suction hose and connect the electric tool

with the connection.

Î B) Use hose Flex-Tool; attach the thicker

end directly to the surction hose and the

other end on the enclosed adapter and

connect it to the electric tool.

Illustration

Î Connect the mains plug of the electric

power tool to the vacuum cleaner.

Î Switch the vacuum cleaner to Position II

and start working.

Note: The suction turbine starts with a de-

lay of 0.5 seconds after the electric tool

has been switched on. After the electric

tool has been switched off, the suction tur-

bine will continue to run for approx. 5 sec-

onds to suck in the remaining dirt from the

suction hose.

Î Turn off the appliance and disconnect the

mains plug.

Empty the container

Illustration

Î Press the unlocking mechanism by foot

and remove the vacuuming device from

the chassis.

Illustration

Î Remove the motor casing and empty the

container.

Î Insert the vacuuming device in the chas-

sis - the container is self-locking.

Storing the Appliance

Illustration

Î Place the accessories in the appropriate

compartments at the appliance and store

the appliance in a dry room.

Î The large wheels facilitate transportation

on stairs; hold the device at the transport

handle while doing so.

Note: Never transport the device at the

handle of the vacuuming device; risk of

tilting!

Î The device is to be fastened properly be-

fore transporting the device in the car.

Note: We recommend that you first re-

move the vacuuming device from the

chassis.

Vacuuming hard surfaces

Vacuuming carpeted floors

Blowing function

Wet vacuum cleaning

Working with electrical power tools

Finish operation

Transporting the device

English 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher A 2236 X Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info