– 6
DANGER
Pointer to immediate danger, which leads to severe in-
juries or death.
몇WARNING
Pointer to a possibly dangerous situation, which can
lead to severe injuries or death.
몇CAUTION
Pointer to a possibly dangerous situation, which can
lead to minor injuries.
ATTENTION
Pointer to a possibly dangerous situation, which can
lead to property damage.
When unpacking the product, make sure that no acces-
sories are missing and that none of the package con-
tents have been damaged. If you detect any transport
damages please contact your dealer.
Illustrations on fold-out page!
1 Filter cover, front
2 Pre-filter
3 Main filter
4 Filter cover, rear
5 Air outlet
6 Digital display
7 Operating field
8 Air quality display
9 Filter cover handle
10 Air quality sensor cover
11 Main Supply
12 On/off operation button
13 Manual mode operation button
14 Automatic mode operation button
15 Night mode operation button
16 Change filter indicator
ATTENTION
Always operate the device with pre-filters and fine filters
installed.
Illustration
Before initial start up, the fine filters already in-
stalled in the unit must be unpacked.
Plug the mains connection into the device
Insert the mains plug into a socket.
All operation buttons on the control panel and the
air quality display light up briefly and go out again.
Press the on/off operation button in order to switch
the device on.
Note
– When the device is switched on, the integrated air
quality sensor automatically measures the air qual-
ity in the room.
– Set the desired mode by pressing the appropriate
operation button on the control panel.
When automatic mode is activated, the device selects
the appropriate fan speed for the measured air quality.
Press the on/off operation button in order to switch
the device on.
Press the automatic mode operation button.
The corresponding button lights up.
Note
– The integrated air quality sensor measures the air
quality and automatically selects the right speed level
to ensure the best possible air quality in the room.
– As soon the air is clean, the device switches to low
fan speed.
When manual mode is activated, you can manually set
the fan speed.
Press the on/off operation button in order to switch
the device on.
Press the manual mode operation button.
The corresponding button lights up.
Note
– By pressing the button several times, the fan speed
can be set in three speeds.
Control panel and display elements are switched off
when night mode is activated.
The unit continues to operate and the fan speed switch-
es to the lowest level.
The unit’s lighting is re-activated by touching the control
panel.
Press the on/off operation button in order to switch
the device on.
Press the night mode operation button.
The corresponding button lights up.
Control panel and display elements switch off with
a time delay.
Press the on/off operation button in order to switch
the device on.
Air quality display is lit:
Blue: Very good air quality (PM2.5 under 60 µg/m3)
Yellow: Mediocre air quality (Pm2.5 between 60 and
160 µg/m3)
Red: Bad air quality (PM2.5 over 160 µg/m3)
– Displays the current value of the fine dust content
(PM2.5).
– Displays the remaining run time of the filter as a
percentage.
Note
– The filter lifespan depends on daily usage pattern
and the air quality.
– Regardless of the indicator, an annual filter change
is recommended for reasons of hygiene.
Hazard levels
Description of the Appliance
Commissioning and operation
Initial startup
Start up
Operating field
Automatic mode
Manual mode
Display Fan speed
One fan blade low
Two fan blades medium
Three fan blades high
Night mode
Air quality display
Digital display
Filter lifespan
