Bedienungsanleitung Karcher Audio MC5400D (Seite 26 von 32) (Deutsch, Englisch)

733552

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

26 | EN

Prune Deletes all invalid stations from the station list.

System Change the menu language, view software version and reset the unit.

Info Display

To display information (if broadcast by station) repeatedly press the INFO button on the unit or on the

remote control.

FM Radio

1. Switch the unit on as described previously.

2. Select the FM mode by pressing the FUNCTION button repeatedly. The frequency will be shown

in the display.

3. Select a desired radio station by pressing the TUN- and TUN+ buttons on the remote control or

by rotating the TUNING knob on the unit.

4. To automatically search for the next available radio station, press and hold for 2 seconds the

or button.

5. Stereo/Mono mode is available for FM radio stations.

In stereo mode you will see “ST” in the display. If there is no “ST” indication in the display below

the frequency then the radio is mono mode. For better reception you can force mono mode (see

section “FM Menu”).

FM Menu

Press and hold for 2 seconds the MENU button while in FM mode to enter the FM menu. Inside the

menu you can select between the following menu items and functions by pressing the / buttons

(to enter menu items and to conrm a selection press the button; to exit menu items and the menu

press and hold the MENU button):

Menu Item Function

Scan Select the scan sensitivity: “All stations” has a strong sensitivity which will also scan

for stations with weak signal, whereas “Strong stations” has a weak sensitivity and

will only scan for stations with strong signal.

Audio Manually select between stereo and mono mode. In areas with weak signal, the

broadcast quality may be improved by selecting mono mode.

System Change the menu language, view software version and reset the unit.

Manually Store Radio Stations

This unit enables you to store up to 30 radio stations:

1. Tune to a radio station which you would like to store.

2. Press and hold for 2 seconds the MEM. button on the remote control.

3. Select a desired preset (1 - 30) on which you want to store the current frequency by pressing the

or button.

4. Press the button to conrm your setting. “STORED” will be shown in the display

5. Repeat steps 1 - 4 to store up to 30 frequencies.

6. To recall a stored frequency, press the MEM. button once, select the desired preset using the

/ buttons and then press the button to play the selected preset.

Automatically Store Radio Stations

Rather than manually storing stations, you can also let the unit automatically store found stations:

1. While in FM mode press and hold for 2 seconds the SCAN button.

2. The unit will now scan and consecutively store found stations (up to 30).

Once nished, the unit will play the station which was rst available.

3. To recall a stored frequency, press the MEM. button once, select the desired preset using the

/ buttons and then press the button to play the selected preset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio MC5400D Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info