Bedienungsanleitung Karcher Audio MC6490DI (Seite 32 von 44) (Deutsch, Englisch)

733555

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

32 | EN

EQ menu. Select the desired preset using the ▲/▼ buttons and then press ENTER.

Display Backlight & Timeout Function

• The display brightness can be adjusted in 3 levels (high, medium, low).

• The brightness level can be adjusted in the System Settings menu (System Settings > Back-

light). You can set the brightness for operation mode as well as standby mode.

• The Timeout setting in the same menu allows you to set a time after which the display brightness

dims down while in standby mode.

Sleep Timer

The sleep function enables you to set a timer after which the unit will turn itself into standby mode

automatically.

• While in any mode, press the SLEEP button on the remote control repeatedly to set the desired

time.

• You can select between 15, 30, 45, 60, 90 or 120 minutes.

• When the sleep timer is activated the display will show a sleep timer symbol with the remaining

time at the bottom.

• To change or cancel the sleep function, press the SLEEP button repeatedly to change the de-

sired time or until “Sleep OFF” appears in the display.

7. Time/Date & Alarms

Time/Date

Time and date will be automatically synchronized through the mode which you select during the setup

wizard.

That means that upon the initial installation of the unit, time and date will be set automatically through

that signal and you do not need to set them manually.

If you do wish to set time and date manually, you can do so inside the System Settings menu.

Alarms

This unit enables you to set 2 separate alarms. You can select to wake to buzzer, Internet Radio,

DAB+, FM or CD. To set an alarm the unit must be switched on.

1. Press the TIMER button on the remote control or the unit to enter the alarm setup menu.

2. Select whether you want to edit alarm 1 or alarm 2 and press ENTER.

3. You can now do the detailed settings (use the arrow buttons ▲/▼ to scroll through the items and

ENTER to view the options, press BACK to go back to the previous menu):

Enable: Set the alarm Off or chose between Daily, Once, Weekends and Weekdays (Mo-Fr).

Time: Set the desired wake up time.

Mode: Select the alarm source (buzzer, Internet Radio, DAB+, FM or CD).

Preset: When one of the radio modes is set for mode, select which station should be played (this

setting is not available when buzzer is selected for mode).

Volume: Set the max. alarm volume. When the alarm comes on, the volume will increase up to

the set max. volume.

Save: Save your settings.

4. You can exit the alarm setting menu now. When you set the Alarm “On” it will sound at the set

time/day.

When the alarm is active the display will show the alarm symbol at the bottom.

Deactivating an Alarm

• To deactivate a set alarm, enter the alarm settings menu and set Enable to “Off”. The alarm is not

active and will not sound.

• Alternatively, while the unit is in standby mode, you can press the TIMER button on the remote

control repeatedly to set alarms 1 and 2 on or off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio MC6490DI Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info