Bedienungsanleitung Karcher Audio RA 2040 (Seite 24 von 28) (Deutsch, Englisch)

652991

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

24 | EN

• To turn the light on, press the LIGHT ON/OFF button on the unit.

• The direction of the light can be adjusted. Only do this carefully.

• To turn the light off, press the LIGHT ON/OFF button once again.

Sleep Function

When the unit is switched on you can select a time intervall after which the unit switches itself auto-

matically into standby mode.

• Press the SLEEP button on the remote control repeatedly until the desired time is reached. The

display will show “SLEEP”.

• With the sleep timer activated you can check how much time is left until the unit switches itself

into standby by pressing the SLEEP button once.

• To deactivate the sleep timer, press the SLEEP button repeatedly until “SLEEP” disappears from

the display.

Radio

Playing the Radio

1. Press the POWER button to switch the unit on.

2. Press the FUNCTION button to select the FM Radio function (“FM” is shown in the display).

3. To automatically tune to the previously/next available radio station, press and hold for 2 seconds

the |◄◄ or ►►| button. The tuning will stop at the rst station found.

4. To manually tune to a radio station, press the |◄◄ or ►►| button repeatedly until you reach the

desired frequency.

5. This unit supports FM Stereo reception. If a station is found which broadcasts in stereo, the

display will show the stereo symbol.

Station Memory

This unit enables you to store up to 20 radio channels.

1. Search for a desired radio station as described above.

2. To store this radio station in the memory, press the PROG. button on the unit or the MEM PROG

button on the remote control. The rst memory preset “P01” will blink in the display.

3. By pressing the |◄◄ / ►►| buttons, select the preset (P01 - P20) on which you would like to

store the tuned in radio station.

4. Press the PROG. button the unit or the MEM PROG button on the remote control ance again to

conrm.

5. Repeat steps 1 - 4 to store up to 20 radio stations.

Note: A stored frequency can only be erased by storing another frequency in its place.

Selecting a Stored Radio Station

In order to recall a stored radio station, turn on the radio and press the M-/M+ buttons repeatedly until

you reach the desired memory preset.

Note: When you disconnect the AC power or in case of a power outage, the preset stations will be lost

and must be reset, unless you have backup batteries installed.

CD Player

CD Playback

1. Press the POWER button to switch the unit on.

2. Press the FUNCTION button to select the CD function (CD symbol is shown in the display).

3. Press the OPEN/CLOSE button to open the CD drawer.

4. Insert a disc with the printed side facing up. Ensure that the disc is inserted correctly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RA 2040 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info