Bedienungsanleitung Karcher Audio RA 2250 (Seite 17 von 20) (Deutsch, Englisch)

652967

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

EN | 17

• Even if the remote control is operated within the effective range, its operation may be impossible

if there are any obstacles between the appliance and the remote control.

• If the remote control is operated near other appliances which generate infrared rays, or if other

remote control devices using infrared rays are used near the appliance, it may operate incor-

rectly.

Basic Functions

Clock Setting

1. To set the clock the unit must be in standby mode.

2. Press and hold for 2 seconds the CLOCK SET button to enter the clock setting mode. The dis-

play will show “12H” ashing.

3. Adjust time format (12H / 24H) by pressing the SKIP+ or SKIP- button.

4. Press the CLOCK SET button to conrm time format. The hours will start ashing.

5. Adjust hour by pressing the SKIP+ or SKIP- button. Press the CLOCK SET button to conrm.

The minutes will start ashing.

6. Adjust minute by pressing the SKIP+ or SKIP- button. Press the CLOCK SET button to conrm.

Alarm Setting

ALARM setting must be after the clock setting has been completed.

1. To set an alarm the unit must be in standby mode.

2. Press and hold for 2 seconds the AL 1 or AL 2 button (depending on whether you want to set

alarm 1 or alarm 2) to enter alarm set mode.

3. Adjust hour by pressing the SKIP+ or SKIP- button. Press the AL 1 (or AL 2) button to conrm.

4. Adjust minute by pressing the SKIP+ or SKIP- button. Press the AL 1 (or AL 2) button to conrm.

5. In the next step you can select the wake up type: Press the SKIP+ or SKIP- button to select

1 - buzz (to wake to buzzer)

2 - Fn (to wake to radio)

3 - usb (to wake to USB)

4 - sd (to wake to SD)

6. Press the AL 1 (or AL 2) button to conrm. The alarm is now set.

• To activate an alarm, press the AL 1 or AL 2 button once while in standby mode. The display will

show “ALARM1” and/or “ALARM2”. You can select only one alarm, or both alarms.

• To stop an active alarm, press the STANDBY button on the unit or the remote control. The alarm

will come on again the next day at the set time.

• To deactivate an alarm press the AL 1 or AL 2 button once until “ALARM1” or “ALARM2” disap-

pears from the display.

Notes:

• If the alarm is set to wake up to RADIO, the last played radio station will come on at the set time.

• If the alarm is set to wake up to USB, SD or RADIO, make sure to set the volume at a level that

will wake you up. You may adjust the volume on the appliance.

• If the alarm is set to wake up to BUZZER, the buzzer volume is xed and cannot be adjusted.

Snooze Function

The snooze function allows you to delay an active alarm for 10 minutes. To do so, press the SNOOZE

button once while the alarm is active. The alarm will stop and come on again after 10 minutes.

Sleep Function

The sleep function enables you to set a countdown timer after which the radio will turn itself into

standby mode automatically.

• While listening to the radio or USB/SD, repeatedly press the SLEEP button to select a desired

countdown after which the radio will turn itself off automatically. “SLEEP” wil be shown in the

display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RA 2250 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info