Bedienungsanleitung Karcher Audio RA2030D (Seite 25 von 32) (Deutsch, Englisch)

733571

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

EN | 25

tons Tuning / .

4. Press the Clock button again. The month starts ashing. Select the desired month using the

buttons Tuning / .

5. Press the Clock button again. The year starts ashing. Select the current year using the but-

tons Tuning / .

6. Press the Clock button again. Time and date are now set and the time is being displayed.

2. Inside the DAB+ menu (see section “DAB+ Radio“).

Alarm & Timer Settings

This unit enables you to set 2 separate alarms. You can select to wake to DAB, FM, USB or buzzer.

1. Press and hold for 2 seconds the AL1 (or AL2) button on the unit. The hour will start ashing. Set

the desired hour by pressing the Tuning / buttons on the unit or the / buttons on the

remote control.

2. Press the AL1 (or AL2) button again (or the Play/Pause/Select button on the remote control).

The minutes will start ashing. Set the desired minutes by pressing the Tuning / buttons.

3. Press the AL1 (or AL2) button again. The alarm duration will start ashing. Set the desired alarm

duration by pressing the Tuning / buttons.

Press the AL1 (or AL2) button again. The source will start ashing. Set the desired source (DAB,

FM, USB, Buzzer) by pressing the Tuning / buttons.

If you select “Buzzer” or “USB”, the setting will continue with the alarm interval.

If you select “DAB” or “FM” you can select which station should be played for alarm. This can be

either the station last listened to, or one of your stored presets (the option of selecting a preset is

only shown when there are stations stored). Make your desired setting by pressing the Tuning

/ buttons.

4. Press the AL1 (or AL2) button again. The alarm interval will start ashing. By pressing the or

button select between the following options:

Interval MO TU WE TH FR SA SU

Daily

Once

Weekends

Weekdays

When you select “Once” you will be asked be asked to enter the specic date on which the alarm

should sound.

5. Press the AL1 (or AL2) button again. The alarm volume will start ashing. Set the desired volume

by pressing the Tuning

/ buttons. Once the alarm is activated it will slowly increase to the

set volume.

6. Press the AL1 (or AL2) button again to set the alarm on or off by pressing the Tuning /

buttons.

7. Press the AL1 (or AL2) button again to conrm your settings. The alarm is now set and will

sound at the set time. The AL1 (or AL2) symbol will be shown in the display.

Activating/Deactivating an Alarm

• To deactivate or reactivate a set alarm, press the AL1 (or AL2) button repeatedly while the unit is

in standby mode. “On” means the alarm is active. “Off” means the alarm is not active and will not

ring. After approximately 10 seconds the unit will switch back to the clock display.

Stopping an Active Alarm

• When the alarm is sounding, press the Power button to turn it off. The alarm will come on

again on the next day at the set time (depending on the set interval).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RA2030D Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info