Bedienungsanleitung Karcher Audio RA2050 (Seite 25 von 28) (Deutsch, Englisch)

733573

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

EN | 25

• Station name

• Program type

• Content information

Notes:

• Not all radio stations transmit RDS information. In such cases the unit will not show any informa-

tion.

• RDS information broadcast may vary from station to station.

• If the radio signal is weak, transmission of RDS information may be disturbed or not shown

properly.

CD Player

Playing Discs

1. Switch the unit on and select the CD mode by pressing the Source button repeatedly.

2. Open the CD drawer by pressing the Open/Close button on the unit. Insert a disc with the printed

side facing up.

3. Close the CD drawer. The CD is being read and the total number of tracks will then be shown in

the display.

4. Playback starts automatically with the rst track.

5. To temporarily stop the playback (pause), press the Play/Pause button once. Press the button

again to resume playback.

6. To stop playback, press the Stop button.

Fast Forward / Fast Rewind & Skipping Tracks

• To jump to the beginning of the currently playing track, press the button once. Press it a

second time to skip to the previous track.

• To skip to the next track, press the button once.

• To fast forward the currently playing track, press and hold the button. Once you reach the

desired section of the track, release the button to resume normal playback.

• To fast rewind the currently playing track, press and hold the button. Once you reach the

desired section of the track, release the button to resume normal playback.

Repeat / Random Modes

At any time during playback press the Repeat/Random button on the unit repeatedly to select

between

• Repeat Track - the current track will be repeated, the display will show .

• Repeat Album (if the CD or USB contains albums) - the current album will be repeated, the dis-

play will show Alb.

• Repeat All - All tracks on the CD or USB will be repeated, the display will show All.

• Random Playback - All tracks will be played in random order, the display will show .

Notes:

• For ease of use the Random and Repeat features have their own buttons on the remote control.

• To disable the Random and Repeat function, please the according buttons repeatedly, until all

Repeat/Random symbols disappear from the display.

Programming Track Order

You can store up to 20 tracks in a desired sequence.

1. While in CD stop mode, press the Prog button. “P 01” and “Prog” will be shown in the display.

2. Using the / buttons, select the track to be played rst in the sequence.

If the disc contains several albums, select the album rst using the - Album/Preset + buttons,

followed by the track.

3. Press the Prog button again. “P 02” will be shown in the display.

4. Repeat the steps 2 - 3 to select up to 20 tracks for your sequence.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RA2050 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info