Bedienungsanleitung Karcher Audio RR 5020 (Seite 18 von 20) (Deutsch, Englisch)

652822

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

18 | EN

CD Player

Playing Discs

1. Switch the unit on into CD mode by setting the Function Switch to “CD”.

2. Open the CD door carefully and insert a disc with the printed side facing up. Close the CD door

again carefully.

3. The disc is being read and the total number of tracks will then be shown in the display.

4. To start playback press the PLAY/PAUSE button. The Play Indicator will be lit steadily.

5. To temporarily stop the playback (pause), press the PLAY/PAUSE button once. The Play

Indicator will be ashing. Press the button again to resume playback.

6. To stop playback, press the ■ STOP button.

7. To switch the unit off, set the Function Switch to “OFF”.

Fast Forward / Fast Rewind & Skipping Tracks

• To jump to the beginning of the currently playing track, press the REW button once. Press it a

second time to skip to the previous track.

• To skip to the next track, press the F.F button once.

• To fast forward the currently playing track, press and hold the F.F button. Once you reach the

desired section of the track, release the button to resume normal playback.

• To fast rewind the currently playing track, press and hold the REW button. Once you reach the

desired section of the track, release the button to resume normal playback.

Repeat Modes

At any time during playback,

• press the REPEAT button once to repeat the current track. The Repeat Indicator will be ashing.

• press the REPEAT button a second time to repeat all tracks. The Repeat Indicator will be lit

steadily.

• press the REPEAT button a third time to deactivate the repeat function. The Repeat Indicator

will disappear from the display.

Programming Track Order

You can store up to 20 tracks in a desired sequence.

1. While in CD stop mode, press the PROG button. The Program Indicator will be ashing in the

display together with “01”.

2. Using the REW / F.F buttons, select the track to be played rst in the sequence.

3. Press the PROG button again. “02” will be ashing in the display.

4. Repeat the steps 2 - 3 to select up to 20 tracks for your sequence.

5. Press the PLAY/PAUSE button to start the playback of your sequence.

6. Fast Forward, Fast Rewind, Skipping Tracks and Repeat Modes can be used as described

above.

7. To stop playback, press the ■ STOP button. To delete your sequence press this button a second

time.

AUX Input

You can connect the audio output of an external device such as an MP3 player to this unit to listen to

the sound of that device through the amplier of this music system.

1. To connect the external device please use a standard stereo audio cable (3.5 mm to 3.5 mm

plugs) (not included) to connect the headphone out or audio line out of the external device to the

AUX input socket of this unit.

2. Turn on the unit by setting the Function Switch to “AM”, “FM” or “CD”. Once the external device

is connected, the unit will automatically switch to AUX mode.

3. Switch the external device (e.g. MP3 player) on.

4. Start playback of the external device and adjust the volume control of the main unit to the desired

level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RR 5020 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info