Bedienungsanleitung Karcher Audio RR 5061 (Seite 18 von 24) (Deutsch, Englisch)

652843

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

18 | EN

3. Though the sound stops, the disc will continue to spin. To re-start playback, press CD PLAY/

PAUSE BUTTON again, music will start from the exact position where it was interrupted.

4. To stop CD playback, press CD STOP BUTTON once whether CD is in Play or Pause mode;

LCD DISPLAY will show total track number of the disc.

5. To turn off the unit, slide FUNCTION SWITCH to “OFF” position.

Skip and search mode

1. During play or pause mode, when CD SKIP/SEARCH FORWARD ►►| or BACKWARD |◄◄ BUT-

TON is pressed once, it will go to next track or go back to the beginning of the track.

2. During play mode, when CD SKIP/SEARCH FORWARD ►►| or BACKWARD |◄◄ BUTTON is

pressed and held, it will search the track with audible high-speed forward or backward playback.

Repeat mode

1. Repeat 1:

When MODE BUTTON is pressed once, Repeat indicator “

” will be

shown on LCD DISPLAY. This single track of music will be repeated.

2. Repeat All:

When MODE BUTTON is pressed twice, Repeat All indicator “ ” will

be shown on LCD DISPLAY. The whole disc can be played continu-

ously.

3. To cancel repeat function:

Press the MODE BUTTON repeatedly until Repeat indicator disappears

from LCD DISPLAY.

Random play mode

This feature allows tracks on the disc to be played in a random order.

1. During CD stop mode, press the MODE BUTTON three times, “RAN-

DOM” indicator will be shown on LCD DISPLAY and all music will be

played in random order automatically.

2. To cancel random play function, press the MODE BUTTON again, “RAN-

DOM” indicator will disappear from LCD DISPLAY.

Program mode

1. During CD stop mode, press PROGRAM BUTTON once. The “PRO-

GRAM” indicator and number of Program to be memorized starts from

the rst program

will light up and blink continuously.

Press CD SKIP/SEARCH FORWARD ►►| or BACKWARD |◄◄ BUTTON

to your desired musical track, LCD DISPLAY will show this appropriate track number. Press the

PROGRAM BUTTON to store this track in memory.

2. Repeat above procedure until all desired tracks have been programmed. A total of 20 tracks can

be stored into memory.

Remarks:

Whenever CD SKIP/SEARCH FORWARD ►►| or BACKWARD |◄◄

BUTTON is pressed, it will always show the last programmed track rst to

recall your memory.

After complete programming, LCD DISPLAY will show “PROGRAM_ _ _”

and ash continuously.

3. Press CD PLAY/PAUSE BUTTON once to start program playback; CD

Play indicator “►” will light up.

4. To check the program you have stored after complete programming,

press PROGRAM BUTTON once during CD stop mode; then press CD

SKIP/SEARCH FORWARD ►►| BUTTON once, LCD DISPLAY will show

Track 8 is to be repeated

Repeat All Indicator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RR 5061 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info