652976
13
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
EN
EN - 13
3. Press the CLOCK.SET button (2) again. The minute starts ashing. Select the current
minute using the buttons ◄ (1) and ► (5).
4. Press the CLOCK.SET button (2) again. The clock is now set and the time is being
displayed.
Alarm Setting
This unit enables you to set 2 different and independent alarm times.
To preview a set alarm time press one of the ALARM buttons (ALARM 1 or ALARM 2) once
while the unit is in clock display mode. After 3 seconds the display switches back to the clock
display.
1. To set an alarm, press the ALARM 1 (6) or ALARM 2 (7) button once to change the
display to alarm mode.
2. In this mode press and hold the respective ALARM button for 2 seconds to switch to
alarm setting mode. The hour starts blinking. Select the desired alarm hour using the
buttons ◄ (1) and ► (5).
3. Press the respective ALARM button again. The minute starts ashing. Select the desired
alarm minute using the buttons ◄ (1) and ► (5).
4. Press the respective ALARM button again. The alarm mode starts ashing. Select either
buzzer (“bu”) or radio using the buttons ◄ (1) and ► (5).
When selecting radio, the last set frequency will ash.
5. Press the respective ALARM button again. If you selected buzzer (“bu”) as alarm mode
the setting is nished and the display will switch back to the clock display.
When you selected radio as alarm mode, the volume starts ashing. Select the desired
radio volume using the buttons ◄ (1) and ► (5). When the alarm goes on the radio
volume will increase until it reaches the set volume.
6. Press the respective ALARM button again. The setting is nished and the display will
switch back to the clock display.
7. The ALARM indicator is lit indicating that the alarm is active.
Functions
Activating/Deactivating an Alarm
To deactivate a previously set alarm, press and hold the respective ALARM button (1 or
2) during regular clock display for 2 seconds until the alarm indicator disappears. This
alarm is now deactivated and will not ring.
To activate a previously set alarm, press and hold the respective ALARM button (1 or 2)
during regular clock display for 2 seconds until the alarm indicator appears in the display.
This alarm will now ring at the previously set time.
Stopping an Alarm
To stop an active alarm, press the respective ALARM button (1 or 2) or the On/Off button (4)
once. The alarm will stop and come back on again at the set time.
Snooze Function
The snooze function allows you to delay an active alarm for 9 minutes. To do so, press the
Snooze button (3) once while the alarm is active. The alarm will stop and come on again after 9
minutes. To cancel this function, press the On/Off button (4) once.
Radio
Listening to the Radio
Press the On/Off button (4) to switch on the radio.
Select a desired radio station by pressing the buttons ◄ / Tune - (1) or ► / Tune + (5)
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Karcher Audio UR 1020 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info