Bedienungsanleitung Karcher BD 50-40 RS (Seite 17 von 272) (Alle Sprachen)

804760

Zoom out

Zoom in

Vorherige Seite

1/272

Nächste Seite

- 5

Carry out the initial trials in an open surface

so that you familiarise yourself with the ap-

pliance.

DANGER

Danger of tipping if gradient is too high.

The gradient in the direction of travel

should not exceed 10%.

Danger of tipping when driving round

bends at high speed.

Danger of slipping on wet floors.

Drive slowly when cornering.

Danger of tipping on unstable ground.

Only use the machine on sound surfaces.

Danger of tipping with excessive sideways

tilt.

The gradient perpendicular to the direc-

tion of travel should not exceed 10%.

Step on the standing platform.

Do not press the accelerator pedal.

Release emergency-stop button by

turning.

Set main switch to “1”.

Set the speed range on the programme

selection switch.

Set the drive direction using the drive

direction button at the operator console.

Note:

The travel direction switch also serves as a

safety switch. Hence, it must be pressed,

even if the desired direction of travel has al-

ready been selected before.

Press the accelerator carefully to drive.

Note:

The direction of travel can also be changed

while driving. This way, even heavily soiled

spots can be cleaned by driving back and

forth several times.

In case of overloading, the drive motor au-

tomatically switches off after a certain peri-

od.

Allow the appliance to cool down at

least for 5 minutes.

Note:

The detergent supply and brush drive are

interrupted till further movement if the de-

vice stands at one place for more than 2

seconds.

Step on the standing platform.

Do not press the accelerator pedal.

Release emergency-stop button by

turning.

Set main switch to “1”.

Turn the program selection switch to

the desired cleaning program.

Set the forward drive direction using the

drive direction button at the operator

console.

Press accelerator pedal and drive to the

surface to be cleaned.

Hook in both ropes on the suction bar

so that the suction bar is not lowered.

Set programme selection switch to "Ap-

ply detergent".

Apply detergent solution to the severelyk

contaminated surface and let it soak in.

Unhook both ropes from the suction bar.

Perform the second cleaning run with

light or high cleaning intensity.

Set the program selection switch to suc-

tion or vacuuming.

Push the appliance a little further to

vacuum up the remaining water.

Park the machine on an even surface.

Turn key to "0" and remove it.

Note:

Overflow waste water tank. The suction

flow is interrupted by a float when the waste

water tank is full. Empty the waste water

tank.

몇WARNING

Please observe the local provisions regard-

ing the wastewater treatment.

Take the wastewater discharge hose

from the support and open the lid of the

drain hose.

Press the hose end together and lower

it over the disposal unit.

Regulate the force of the dirt waster

stream by pressing the hose end to-

gether.

Swivel the top of the appliance forward.

Clean the swimmer and check the

movement of the swimmer ball.

Rinse the waste water tank with clear

water.

Clean the interior of the top of the appli-

ance.

Press the wastewater hose into the

holder on the appliance.

Take the fresh water discharge hose

from the support and lower above a

suitable collection device.

Drain off the detergent liquid.

Remove the lid from the fresh water

reservoir.

Rinse the fresh water reservoir with

clear water (max. 60°C).

ATTENTION

Risk of damage for fresh water container,

valves and seals. Never leave the cleaning

solution in the fresh water reservoir after

operation.

Store the appliance as shown above to

dry off the tanks.

DANGER

Risk of injury! When loading or unloading

the machine, it may only be operated on

gradients of max. 10%. Drive slowly.

몇CAUTION

Risk of personal injury or damage! Mind the

weight of the appliance during transport.

Remove the suction bar and the brush

from the appliance.

When transporting in vehicles, secure

the appliance according to the guide-

lines from slipping and tipping over.

Fastening points

몇CAUTION

Risk of personal injury or damage! Consider

the weight of the appliance when storing it.

This appliance must only be stored in inte-

rior rooms.

Driving

Overload

Cleaning

Severe soiling (two-step method)

Complete cleaning

Shutting down

Empty tanks

Drain off dirt water

Drain off clean water

Transport

Storage

17EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher BD 50-40 RS Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info