Bedienungsanleitung Karcher BD 70-75 W (Seite 17 von 252) (Alle Sprachen)

804750

Zoom out

Zoom in

Vorherige Seite

1/252

Nächste Seite

English 17

Transport

DANGER

Driving on slopes

Risk of injury

Observe the maximum permissible inclina-

tion when driving the device on slopes for

loading and unloading purposes (see chap-

ter “Technical data”).

Drive slowly.

몇CAUTION

Failure to observe the weight

Risk of injury and damage

Be aware of the weight of the device during

transport.

Only load the device with the assistance of

another person or by using the drive.

1. Press the cleaning head lever down and

latch it in place.

2. Raise the suction bar.

3. Turn the key-operated switch to "1".

4. Select the travel direction at the travel di-

rection switch.

5. Pull the safety switch towards the push

handle.

6. When transporting in vehicles, secure

the device against slipping and tipping

over according to the applicable guide-

lines.

7. First fit the strap under the waste water

tank.

Storage

몇CAUTION

Risk of injury and damage!

The device may tip over on sloping surfac-

es.

Be aware of the weight of the device during

storage.

ATTENTION

Frost

Destruction of the device through freezing

water

Drain all water from the device.

Store the device in a frost-free location.

●This device may only be stored indoors.

●Before prolonged storage:

1. Bring the battery/batteries to a state of

charge between 30% and 50%.

2. Disconnect the charger from the battery

connector.

3. Press the button on the battery for 20

seconds to put the battery into sleep

mode.

1Button

2Charge indicator

3Battery

The LEDs of the charge indicator all light

up and go out one after the other. The

charge indicator will now no longer react

when the button is pressed briefly.

Note

For devices with multiple batteries, this pro-

cedure only needs to be carried out on one

battery. The other batteries take over the

sleep mode automatically.

Care and maintenance

DANGER

Risk of injury!

The device may start moving unexpectedly

and cause injury.

Turn the key-operated switch to "0" and re-

move the key before performing any work

on the device.

Pull out the charger mains plug.

Drain and dispose of the waste water

and fresh water.

Safety inspection/maintenance

contract

You can agree on regular safety inspec-

tions or close a maintenance contract with

your dealer. Please seek advice on this.

Maintenance intervals

Each time after use

ATTENTION

Improper cleaning

Risk of damage.

Do not spray the device with water.

Do not use aggressive cleaning agents.

A detailed description of the individual

maintenance work is provided in Chapter

Maintenance work.

Drain the waste water.

Rinse the waste water tank with clear

water.

Clean the exterior of the device using a

damp cloth, wetted with a mild washing

lye.

Check the fluff filter and clean if re-

quired.

Clean the coarse dirt filter.

Clean the suction lips, check for wear

and adjust the height or replace if neces-

sary.

Check the disc brushes for wear and re-

place if necessary.

Charge the battery.

If the charging state of the battery is

below 50%, charge the battery fully

and without interruption.

If the charging state of the battery is

above 50%, only recharge the battery

if the entire operating duration will be

required when next used.

Monthly

A detailed description of the individual

maintenance work is provided in the chap-

ter "Maintenance Work".

1. Drain the fresh water tank and flush out

deposits.

2. Clean the fresh water filter.

3. Clean the float and fluff filter.

4. Check battery poles for oxidation, brush

off if necessary. Make sure the connec-

tion cables are firmly in place.

5. Clean the seals between the waste wa-

ter tank and the cover, check for leaks

and replace if necessary.

6. For longer periods of disuse, shut down

the device when the batteries are fully

charged. Fully charge the battery at

least once a month.

Annually

Have the prescribed inspection per-

formed by Customer Service.

Maintenance work

Turn over or replace the worn suction

lips

The suction lips must be turned over or re-

place when they have worn down to the

wear mark.

1Wear mark

2Suction lip

1. Remove the suction bar.

2. Unscrew the star handles.

3. Pull off the plastic parts.

4. Pull off the suction lips.

5. Push in the turned over or new suction

lips.

6. Push on the plastic parts.

7. Screw in and tighten the star handles.

Cleaning the coarse dirt filter

1. Open the waste water tank cover.

CHANGE LIP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher BD 70-75 W Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info