Bedienungsanleitung Karcher BR 30-4 C Bp (Seite 15 von 236) (Alle Sprachen)

804742

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

– 5

Cleaning the waste water tank: Drain

the waste water tank and rinse it with

fresh water. Clean the seals between

the waste water tank and the device.

Rinse the appliance: Fill the fresh water

reservoir with clear water (without de-

tergent) and let the appliance run for

one minute with the brush water supply

turned on.

Remove the remaining water from the

fresh water tank.

Clean the outside of the appliance with

a damp cloth which has been soaked in

mild detergent.

Clean the vacuum bar, check for wear

and replace if required (see "Mainte-

nance tasks").

Check the brush for wear and replace if

required (see "Maintenance tasks").

Have the prescribed safety inspection

carried out by an electrician.

Note:

The vacuum bars are attached to the appli-

ance with snaps and can simply be pulled

off.

Set the suction bar lifting pedal to the

"suction" position ("1/ON" position).

Remove the fresh water reservoir.

Remove the waste water tank.

Lay the device on the reverse.

Pull off the vacuum bar downwards.

Insert the new vacuum bars and lock

them into place.

Remove the fresh water reservoir.

Remove the waste water tank.

Lay the device on the reverse.

Press the release button for the brush

roller and swivel the brush roller toward

the bottom and pull it off the driver.

Place the new brush roller on the driver

and lock into place on the opposite side.

Remove the roller brush (see "Chang-

ing the roller brush").

Illustration

Pull out the water distribution strip in the

brush tunnel.

Clean the irrigation channel and the

opening in the water distribution bar un-

der running water.

Remove the fresh water reservoir from

the appliance.

Swivel support bow downward and re-

move the waste water tank.

Illustration

Pull the connection between the suction

pipe and the suction hose to the rear out

of the device and swing out the suction

pipe and suction hose.

The suction tube is separated and both

ends are accessible for cleaning.

Illustration

Pull the suction bar downwards, the

suction channel in the cleaning head is

accessible for

cleaning.

Flush the suction hose and the suction

channel with water or pull or push the

obstruction out with a blunt object.

In case of danger of frost:

Empty the fresh and dirt water reservoirs.

Store the appliance in a frost-protected

room.

The warranty terms published by our com-

petent sales company are applicable in

each country. We will repair potential fail-

ures of your accessory within the warranty

period free of charge, provided that such

failure is caused by faulty material or de-

fects in fabrication. In the event of a warran-

ty claim please contact your dealer or the

nearest authorized Customer Service cent-

er. Please submit the proof of purchase.

Yearly

Maintenance Works

Replace the vacuum bar.

Replacing the brush roller

Cleaning and care

Clean water distributor

Clean suction tube

Frost protection

Warranty

15EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher BR 30-4 C Bp Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info