Bedienungsanleitung Karcher CNS 18-30 Battery (Seite 22 von 344) (Alle Sprachen)

725101

Zoom out

Zoom in

Vorherige Seite

1/344

Nächste Seite

22 English

 Personal tendency to suffer from poor circulation

(frequently cold fingers, tingling sensation in the fin-

gers)

 Low ambient temperature. Wear warm gloves to

protect your hands.

 Holding the device too tightly hindering blood circu-

lation.

 Continuous operation is more harmful than opera-

tion interrupted by work breaks.

You should see a doctor if using the device regularly

and for lengthy periods of time, and in the event of re-

peated occurrences of symptoms such as tingling in

the fingers or cold fingers.

Intended use

 DANGER

Improper use

Danger of death from incision injuries

Only use the device for its proper use.

 The chainsaw is only intended for private use.

 The chainsaw is intended for outdoor use.

 For safety reasons, always hold the chainsaw firmly

with both hands.

 The chainsaw was developed for sawing small

branches, large branches, trunks and beams. The

cutting length of the guide rail determines the maxi-

mum possible diameter of the sawed material.

 The chainsaw may only be used for cutting wood.

 Do not use the chainsaw in a wet environment or in

the rain.

 Use the chainsaw only in a well lit environment.

 Modifications and changes to the device that are not

authorised by the manufacturer are prohibited for

safety reasons.

Any other use is prohibited. The user shall be liable for

hazards arising as a result of improper use.

Environmental protection

The packing materials can be recycled. Please

dispose of packaging in accordance with the en-

vironmental regulations.

Electrical and electronic appliances contain valu-

able, recyclable materials and often components

such as batteries, rechargeable batteries or oil,

which - if handled or disposed of incorrectly - can

pose a potential threat to human health and the environ-

ment. However, these components are required for the

correct operation of the appliance. Appliances marked

by this symbol are not allowed to be disposed of togeth-

er with the household rubbish.

Notes on the content materials (REACH)

Current information on content materials can be found

at: www.kaercher.com/REACH

Accessories and spare parts

Only use original accessories and original spare parts.

They ensure that the appliance will run fault-free and

safely.

Information on accessories and spare parts can be

found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the

packaging. Check the contents for completeness when

unpacking. If any accessories are missing or in the

event of any shipping damage, please notify your deal-

er.

Safety devices

몇 CAUTION

Missing or modified safety devices

Safety devices are provided for your own protection.

Never modify or bypass safety devices.

Chain with a low risk of kickback

A chain with a low risk of kickback reduces the likelihood

of kickback.

The raked teeth (engagement blades) in front of each

saw tooth prevent the saw teeth from engaging too

deeply in the kickback zone, thus reducing the amount

of kickback.

When grinding the chain, there is a danger that this

safety function will be overridden. If the saw perfor-

mance deteriorates, the chain should be replaced for

safety reasons. For spare parts, use only the combina-

tion of guide rail and chain recommended by the manu-

facturer.

Guide rails

Guide rails whose tips have a small radius usually carry

a lower risk of kickback.

Therefore use a guide rail with matching chain for the

task, which is just long enough. Longer guide rails in-

crease the likelihood of loss of control during sawing.

Check the chain tension before each use (see chapter

Checking the chain tension). If the chain tension is not

set correctly, sawing smaller branches (thinner than the

full length of the guide rail) increases the danger of the

chain being thrown off.

Chain catcher

If the chain loosens or tears, the chain catcher prevents

the chain from being thrown in the direction of the user.

Bucking spikes

The integrated bucking spikes can be used as a fulcrum

to give the chain saw stability during a cut.

When sawing, press the device forward until the metal

spikes penetrate the edge of the wood. Subsequently

moving the rear handle up or down in the direction of the

cut reduces the physical strain when working with the

chainsaw.

Chain brake

Chain brakes are used in case of danger to bring the

chain quickly to a standstill.

The chain must come to a standstill immediately when

the hand guard/chain brake lever is pressed in the direc-

tion of the guide rail.

The chain brake cannot prevent kickback, but reduces

the risk of injury if the guide rail hits the user in the event

of a kickback.

The proper function of the chain brake must be checked

before each use of the device (see chapter Checking

the functionality of the chain brake).

Symbols on the device

General warning symbol

Read the operating instructions and all

safety instructions before operating the

device for the first time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher CNS 18-30 Battery Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info