Bedienungsanleitung Karcher CV 38-2 Adv (Seite 11 von 144) (Alle Sprachen)

804533

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

English 11

22 Cushion nozzle

23 Crevice nozzle

24 "Filter" indicator lamp

25 Indicator tuft

26 Roller brush

Installation

Install the loose parts for handle provided with the de-

vice before using the device for the first time.

See page 4 for illustrations

1Handle with mains power cable

2Handle metal tube

3Suction pipe and suction hose

1. Open the handle adjustment.

2. Push the metal pipe of the handle into the mount all

the way to the lowest latching position (latches audi-

bly twice).

3. Insert the handle into the metal pipe and latch into

place. Take care to ensure that the mains cable is

not jammed or twisted.

4. Pull the handle to the first (uppermost) latching po-

sition.

5. Close the handle adjustment.

6. Insert the suction hose into the connection nozzle.

7. Insert the suction pipe into the mount on the device

Startup

Installing the filter bag

1. Unlock and remove the filter cover.

2. Turn the filter bag lock to the right to unlock.

3. Insert the filter bag and turn the filter bag lock to the

left to lock.

4. Fit and lock the filter cover.

Connecting the mains power cable to the

device

1. Open the cable holder at the handle.

2. Plug the mains cable provided into the socket on the

device.

3. Secure the plug connection against unintentional

unplugging using the cable holder on the handle.

Use only the mains cable provided and only replace it

with an equivalent cable in the case of damage (see

"Technical data").

Operation

Adjusting the height of the handle

The height of the handle is adjustable.

See page 4 for illustrations

1. Open the handle adjustment.

2. Move the handle up or down to set the desired

height.

3. Close the handle adjustment.

Switching on the device

1. Connect the mains plug.

2. Switch on the device at the main switch.

Electronic brush monitoring

The electronic brush monitoring continuously monitors

the function of the roller brush.

The indicator light shows the respective operating

mode:

●Off: Roller brush functioning correctly.

●Lights up orange: Incorrect fibre height setting - set

the fibre height selection knob to a lower fibre

height.

●Also lights up orange at the lowest setting: Replace

the roller brush.

Note

Visual brush inspection: The degree of wear can be de-

termined by comparing the differently coloured indicator

tufts. Replace the roller brush when the black bristles

are the same height as the red bristles.

Roller brush operation

ATTENTION

Risk of damage to the floor covering!

Do not operate the device continuously at the same

point.

1. Adjust the fibre height using the selection knob on

the brush head.

2. Perform cleaning.

Using accessories

Vacuum with the crevice nozzle and cushion nozzle.

See page 4 for illustrations

1. Pull the suction pipe out of the mount.

2. Remove the desired accessory from the storage

compartment and plug it onto the suction pipe.

3. Perform cleaning.

Suction pipe operation

ATTENTION

Risk of damage!

When vacuuming using the suction hose, allow the de-

vice to latch into position without moving so that the

brush motor switches off and does not damage the car-

pet.

Switching off the device

1. Switch off the device at the main switch.

2. Pull out the mains plug.

Cable storage

The mains cable can be stored on the device.

See page 4 for illustrations

1. Wind the mains power cable onto the winding aid.

2. Wind the mains cable around the cable hook and

handle.

3. To remove the cable, open the cable hook and re-

move the cable from the handle.

Transport

몇CAUTION

Failure to observe the weight

Risk of injury and damage

Be aware of the weight of the device during transporta-

tion.

1. Wind the mains cable around the cable storage.

2. Carry the device by the carrying handle.

3. When transporting the device in vehicles, secure it

to prevent it from slipping or overturning in accord-

ance with the respective valid guidelines.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher CV 38-2 Adv Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info