725019
27
Zoom out
Zoom in
Vorherige Seite
1/378
Nächste Seite
English 27
Trimming hedges / shrubs with the shrub
shears
CAUTION
Risk of injury from sharp blades
Wear safety goggles and protective gloves when work-
ing on the device.
CAUTION
Obstacles in the mowing area
Risk of injury and damage
Before starting mowing, check the work area for objects
that may be flung away, e.g. wires, stones, cords or
glass.
1. Switch the device on.
Illustration F
a Press the unlocking button.
b Press the ON/OFF switch.
The device starts up.
2. Guide the cutting blade parallel to the hedge.
Illustration H
Changing the cutting blade
1. Remove the battery pack, see Chapter Removing
the battery pack.
2. Slide the blade guard over the cutting blade.
Illustration B
3. Change the cutting blade.
Illustration I
a Release the mounting button from the cutting
blade.
b Remove the mounting button.
c Remove the cutting blade of the grass or shrub
shears.
d Fit the cutting blade of the grass or shrub shears
onto the mount.
e Place the mounting button onto the cutting blade.
f Refit the mounting button on the cutting blade.
Removing the battery pack
Note
During longer work breaks, remove the battery pack
from the device and secure it against unauthorised use.
1. Pull the unlocking button towards the battery pack.
2. Press the unlocking button inward to unlock the bat-
tery pack.
3. Remove the battery pack from device.
Illustration J
Finishing operation
1. Remove the battery pack from the device (see
Chapter Removing the battery pack).
2. Clean the device (see Chapter Cleaning the de-
vice).
Transport
CAUTION
Risk of injury and damage
Be aware of the weight of the device during transporta-
tion.
1. Remove the battery pack, see Chapter Removing
the battery pack.
2. Slide the blade guard over the cutting blade.
Illustration B
3. Removing the cutting blade.
Illustration K
a Release the mounting button from the cutting
blade.
b Remove the mounting button from the cutting
blade.
c Removing the cutting blade.
d Place the mounting button onto the cutting blade.
e Refit the mounting button on the cutting blade.
4. Secure the device against slipping and tipping over
when transporting in vehicles.
Storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
1. To clean the device, see Chapter Cleaning the de-
vice.
2. Install the blade guard.
Illustration B
3. Store the device in a dry, well ventilated location.
Keep away from corrosive substances such as gar-
den chemicals and defrosting salt. Do not store the
device outdoors.
Care and service
Cleaning the device
WARNING
Risk of injuries due to uncontrolled start-up of the
cutting blades
Switch off the device.
Remove the battery pack from the device.
Attach the blade guard.
CAUTION
Risk of injury from sharp blades
Wear safety goggles and protective gloves when work-
ing on the device.
ATTENTION
Incorrect cleaning
Damage to the device
Clean the device with a damp cloth.
Do not use solvent-based cleaning agents.
Do not immerse the device in water.
Do not clean the device with a hose or high-pressure
water jet.
Illustration L
1. Remove residual mown material from the cutting
blade using a hand brush.
2. Clean the unit parts with a damp cloth if required.
3. Regularly remove dirt and foreign objects from the
battery mount and electrical contacts.
4. Install the blade guard.
Oiling the blade sections
In order to maintain the blade quality, the blade sections
should be oiled after each use.
Note
Using thin machine oil or spray oil will yield very good
results.
Illustration M
1. Place the device on a flat surface.
2. Apply oil to the top of the blade sections.
Troubleshooting guide
Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.
As the battery pack ages, even if it is looked after, its ca-
pacity reduces such that the full run time will no longer
be reached when fully charged. This does not indicate a
defect.
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Karcher GSH 18-20 Battery wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info