Bedienungsanleitung Karcher HD 13-12-4 ST-H (Seite 30 von 168) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

726318

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

- 13

– Check the contents of the pack before

unpacking.

– In case of transport damage inform ven-

dor immediately.

– Store the drilling template on the carton

to assemble the device.

Note:

The water connection, the high pressure

network as well as the electrical connection

can only be carried out by authorised ex-

perts in accordance with local regulations.

– The installion should be set-up in a dry,

non-explosive environment.

– The installion should be installed on

firm and even ground.

– The installion should be easily accessi-

ble for maintenance work.

The following are required for installation:

– Wall mount

– Installation with the mounting kit floor

rack (optional)

몇CAUTION

Risk of personal injury or damage! Note the

weight of the appliance during installation.

ATTENTION

Risk of damage! Freezing water in the ap-

pliance can destroy parts of the appliance.

The machine should be stored in frost-free

rooms. In case there is frosting risk, for e.g.

if the machine is installed in open areas,

then the machine must first be emptied and

flushed using an anti-freezing agent.

Check the wall's support capacity.

Mark the wall using the drill template on

the packaging.

Drill the bores into the wall.

Attach the installation materials to the

wall.

Remove the appliance cover.

Hang up the appliance and secure it

against falling down.

Replace the appliance hood and fasten

it with screws.

– For connection values, see technical

data and type plate.

– The power supply designed for operat-

ing the plant must be suitable for contin-

uous operations.

– The electrical connections must be

done by an electrician according to IEC

60364-1.

– Current-carrying parts, cables and ap-

pliances in the working area must be in-

stalled in a defectless state and must be

protected against water sprays.

– Design the water supply for continuous

operations.

– The water feed line is provided with a

stop valve and can be moved over a

pressure hose and attached to the high

pressure system.

– If the cross section of the line is too

small or if the advance pressure is too

low, there will be a lack of water.

– When the advance pressure or the

rinse pressure is too high, it is absolute-

ly necesary to install a pressure reduc-

er.

– A water drain must be present at instal-

lation site.

For installation, please follow the specifica-

tions of the VDMA sheet 24416 "High pres-

sure cleaners; fixed high pressure cleaning

systems; concepts, requirements, installa-

tion, testing" (the German version can be

procured from Beuth Verlag, Cologne,

www.beuth.de).

– The fixed pipe network and the install-

ion should be connected with a high

pressure line.

– The fixed pipe network should be

placed as straight as possible. High

pressure piping systems should be in-

stalled correctly with removable and

fixed clips, taking into consideration the

variation in length caused by the effects

of heat and pressure.

– In order to keep pressure losses in the

high pressure piping as small as possi-

ble, we recommend the following:

Pipelines: Nominal width DN 15 (1/2“).

Hose lines: Nominal width DN 8.

In regards to the above mentioned stand-

ard values, the length of the pipes and the

number of direction changes and fittings

must be taken into account.

Note: The EASY!Lock system joins com-

ponents with a quick-fasten thread solidly

and securely with just one turn.

Illustration, see "Operating components".

Mount the nozzle on the spray lance

(marking on the adjustment ring at the

top) and hand-tighten it (EASY!Lock).

Join the spray lance with the trigger gun

and tighten until hand-tight

(EASY!Lock).

Join the high-pressure hose with trigger

gun and tighten until hand-tight

(EASY!Lock).

Connect the high-pressure hose to the

high-pressure outlet of the device or the

high-pressure pipeline network

(EASY!Lock).

The detergent tank is set up in such a way,

that the bottom of the tank is located not

more than 1.5 m unter the unit.

Check that water inlet has the required

flow and the permissible temperature.

Check oil level of the pump.

Cut off tip of oil container.

Installing the plant

Only for authorised techni-

cians!

Unpacking

Installation

Fasten the device to the wall

Electrical connection

Water supply

High pressure installation

Install hand spray gun, spray lance

and nozzle

Install the detergent tank

Initial startup

30 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher HD 13-12-4 ST-H Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info