Bedienungsanleitung Karcher HD 18-50-4 Cage Classic (Seite 19 von 296) (Alle Sprachen)

726243

Zoom out

Zoom in

Vorherige Seite

1/296

Nächste Seite

– 6

 Open the water supply.

 Plug in the mains plug.

 Set the appliance switch to "I".

 Unlock the safety lock at the hand-

spray gun by pressing it.

 Press the lever on the hand spray gun.

몇 WARNING

The water jet that is emitted from the high-

pressure nozzle results in a repulsion power

acting on the hand spray gun. Make sure that

you have a firm footing and hold the trigger

gun and the spray lance with both hands.

The shoulder support (2.639-251.0) should

be used to prevent injuries and to make

work easier at recoil pressures > 150 N.

The appliance is equipped with the follow-

ing nozzles:

– Power nozzle, 15° spray angle

High pressure flat stream (15°) for large

areas of contamination.

 The working pressure can be read from

the manometer.

Note:

Always direct the high-pressure jet at the

object to be cleaned from a distance to

avoid damage from high pressure.

 Release the lever of the trigger gun.

 Use the safety catch to secure the

handgun lever.

 Store the hand spray gun and spray

pipe in the accessory mount.

The working pressure can be changed by

using different high-pressure nozzles.

 Select a nozzle from the table above.

 Unscrew the union nut from the spray

lance.

 Replace nozzle.

 Screw on and tighten the union nut.

Note:

This method of pressure adjustment al-

ways means that the full flow rate of 1800 l/

h is always available.

 Release the lever of the trigger gun.

 Set the appliance switch to "0".

 Shut off water supply.

 Activate hand spray gun until device is

pressure less.

 Use the safety catch to secure the

handgun lever.

 Remove the water inlet hose from the

appliance.

 Pull out the mains plug.

 Stow away the mains cable, the high-

pressure hose and accessory at the ap-

pliance.

몇 WARNING

Risk of damage! Freezing water in the ap-

pliance can destroy parts of the appliance.

Store the appliance in a heated room dur-

ing winter or empty it. During longer breaks

in operation, it is advisable to pump in anti-

frost agents into the appliance.

 Screw off water supply hose and high

pressure hose.

 Blow through machine with com-

pressed air.

Note:

Observe handling instructions of the anti-

freeze agent manufacturer.

Turning on the Appliance

High pressure operation

Power nozzle

Interrupting operation

Changing working pressure

Pressure

MPa (bar)

Nozzle

size

Order number

Flat jet nozzles

50 (500) 15060 5.765-263.0

35 (350) 15075 2.113-073.0

25 (250) 15095 2.113-075.0

15 (150) 15120 2.113-077.0

Detail nozzles

50 (500) 060 5.765-264.0

35 (350) 075 2.113-074.0

25 (250) 095 2.113-076.0

15 (150) 120 2.113-078.0

Finish operation

Frost protection

Drain water

Flush device with anti-freeze agent

19EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher HD 18-50-4 Cage Classic Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info