Bedienungsanleitung Karcher HD 6-13 C (Seite 18 von 312) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

459096

Zoom out

Zoom in

Vorherige Seite

1/312

Nächste Seite

– 2

Use this high pressure cleaner exclusively for

– Cleaning using low pressure jet and de-

tergent (for e.g. for cleaning machines,

cars, buildings, tools),

– For cleaning using high pressure jet

without detergent (for e.g. for cleaning

facades, terraces, garden appliances).

For stubborn dirt, we recommend the use of

the dirt blaster as a special accessory.

Safety devices serve for the protection of the

user and must not be put out of operation or

bypassed with respect to their function.

If the lever on the trigger gun is released

the pressure switch turns off the pump, the

high-pressure jet is stopped. If the lever is

pulled the pump is turned on again.

The overflow valve and pressure switch are

set and sealed at the factory. Setting only

by customer service.

While reducing the water supply/quantity

regulation at the pump head, the overflow

valve opens and part of the water flows

back to the pump suck side.

Notes about the ingredients (REACH)

You will find current information about the

ingredients at:

http://www.karcher.de/de/unternehmen/

umweltschutz/REACH.htm

Î Read the oil level display when the de-

vice is not running. The oil level must be

above the two pointers.

Î Unscrew the fastening screws of the

device hood; remove the device hood.

Î Cut off tip of oil container cover

Î Fasten the device hood.

Î Mount the nozzle on the spray pipe (mark-

ings on the adjustment ring at the top).

Î Connect ray tube to hand spray gun

Î Lever out the safety clip of the handspray

gun using a screw-driver (Picture A).

Î Place the hand-spray gun upside down

and insert the end of the high pressure

hose till the end. Ensure that the lose

disc falls right below on the hose end

(Picture B).

Î Press the safety clip back into the hand-

spray gun. The hose can be pulled out

max. 1 mm if it has been installed cor-

rectly. Otherwise, it means the disc has

been installed wrongly (picture C).

Î Loosen the clamps of the pushing han-

dle.

Î Adjust the handle to the desired height.

Î Tighten the clamps of the pushing han-

dle.

Î Fasten the high pressure hose to the

high pressure connection.

Proper use

Safety Devices

Pressure switch

Overflow valve (only HD 6/13...)

Environmental protection

The packaging material can be

recycled. Please do not throw

the packaging material into

household waste; please send it

for recycling.

Old appliances contain valuable

materials that can be recycled;

these should be sent for recy-

cling. Batteries, oil, and similar

substances must not enter the

environment. Please dispose of

your old appliances using ap-

propriate collection systems.

Please do not release engine oil, fuel oil,

diesel and petrol into the environment Pro-

tect the ground and dispose of used oil in

an environmentally-clean manner.

Before Startup

Check oil level

Activate deaeration of oil container

Attaching the Accessories

In devices without hose drum:

18 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher HD 6-13 C Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info