Bedienungsanleitung Karcher HD10-23-4S (Seite 16 von 240) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

459053

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

– 2

Use this high pressure cleaner exclusively for

– Cleaning using low pressure jet and de-

tergent (for e.g. for cleaning machines,

cars, buildings, tools),

– For cleaning using high pressure jet

without detergent (for e.g. for cleaning

facades, terraces, garden appliances).

For stubborn dirt, we recommend the use of

the dirt blaster as a special accessory.

If the lever on the trigger gun is released the

pressure switch turns off the pump, the high-

pressure jet is stopped. If the lever is pulled the

pump is turned on again.

The overflow valve prevents the permissible

working pressure from being exceeded.

The overflow valve and pressure switch are set

and sealed at the factory. Setting only by cus-

tomer service.

Setting only by customer service.

The motor protection switch switches off the de-

vice if the power consumption is high.

Safety devices serve to protect the user and

must not be rendered inoperational or their

functions bypassed.

Notes about the ingredients (REACH)

You will find current information about the

ingredients at:

http://www.karcher.de/de/unternehmen/

umweltschutz/REACH.htm

– Check the contents of the pack before

unpacking.

– In case of transport damage inform ven-

dor immediately

 Read the oil level display when the de-

vice is not running. The oil level must be

above the two pointers.

 Unscrew the fastening screws of the

device hood; remove the device hood.

 Cut off tip of oil container cover

 Fasten the device hood.

 Install nozzle with nozzle screw at the

spray pipe.

 Connect ray tube to hand spray gun

 Tighten the screw connection of the

spray lance fingertight.

 Insert the crank in the hose drum shaft

and lock it in.

 Lock in the cable hook in the side-hole

on the handle.

 Tighten the high-pressure connection

as required.

 Lever out the safety clip of the handspray

gun using a screw-driver (Picture A).

 Place the hand-spray gun upside down

and insert the end of the high pressure

hose till the end. Ensure that the lose

disc falls right below on the hose end

(Picture B).

Proper use

Safety Devices

Environmental protection

The packaging material can be

recycled. Please do not place

the packaging into the ordinary

refuse for disposal, but arrange

for the proper recycling.

Old appliances contain valuable

materials that can be recycled.

Please arrange for the proper

recycling of old appliances. Bat-

teries, oil, and similar substanc-

es must not enter the

environment. Please dispose of

your old appliances using appro-

priate collection systems.

Before Startup

Unpacking

Check oil level

Activate deaeration of oil container

Attaching the Accessories

In devices without hose drum:

For hand-spray guns with threaded con-

nection:

For hand-spray guns without threaded

connection:

16 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher HD10-23-4S Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info