Bedienungsanleitung Karcher HDS 13-35 De Tr1 (Seite 22 von 512) (Alle Sprachen)

726237

Zoom out

Zoom in

Vorherige Seite

1/512

Nächste Seite

- 2

DANGER

Risk of injury!

–Only use original high-pressure hoses.

–The high-pressure hose and the injec-

tion system must be suitable for the

maximum operating pressure given in

the Technical Data.

–Avoid contact with chemicals.

–Check the high-pressure hose daily.

Do not use hoses with kinks.

Stop using the high-pressure hose if the

external wire layer is visible.

–Do not use the high-pressure hose any-

more if the winding is damaged.

–Lay the high-pressure hoses in such a

way that no vehicle can drive over it.

–Do not use high-pressure hoses that

have been driven over, kinked, pressed

or bent even if there is no externally vis-

ible damage.

–Store the high-pressure hoses in such a

way that they are not subject to any me-

chanical load.

– The high pressure pump is driven by an

intermediate gear by a diesel motor.

– Between the float container and the

high-pressure pump the water is heated

by means of a heat exchanger that is lo-

cated in the cooling circuit of the motor.

– When the jet operation is interrupted,

the overflow valve switches to pres-

sure-free water circulation and the mo-

tor continues running at idling speed.

– The water is heated by a pressure-side

burner with oil firing.

– During hot water operation, softening

agents are added to the water.

– HDS 9/50, HDS 13/35 only (optional

with HDS 13/20, HDS 17/20):

The operating pressure can be selected

via the speed control of the motor.

– HDS 13/20, HDS 17/20 only:

The high-pressure pump draws deter-

gent. The proportion of detergent in the

water can be adjusted using the dosing

valve.

– HDS 13/20, HDS 17/20 only (optional):

Attachment kit for removing weeds with

hot water.

Safety devices serve for the protection of

the user and must not be put out of opera-

tion or bypassed with respect to their func-

tion.

– To take all functions out of operation im-

mediately: Push the emergency stop

button.

– The device can only be put into opera-

tion if the front cover is closed.

– If the front cover is opened during oper-

ation, the device shuts down and the in-

dicator light front cover/emergency stop

is red.

– If the trigger gun is closed, the overflow

valve opens and the high-pressure

pump leads the water back into the float

container. Thus the permissible work-

ing pressure is not exceeded.

– HDS 13/20, HDS 17/20 only:

When the water quantity is reduced via

the pressure/quantity control on the

trigger gun, the overflow valve opens

and part of the water flows into the float

tank or the water tanks (depending on

the position of the ball tap return flow

valve).

– The overflow valve is set by the manu-

facturer and sealed. Setting only by

customer service.

– The safety valve opens when the over-

flow valve is defective.

– The safety valve is set by the manufac-

turer and sealed. Setting only by cus-

tomer service.

– If the charging current of the alternator

is insufficient during the charging pro-

cess of the battery, the device shuts

down.

– Display malfunction: ERROR 1

– If the water inlet temperature exceeds

the maximum permissible temperature,

the device shuts down.

– If the cooling water temperature ex-

ceeds the maximum admissible tem-

perature, the device shuts down.

– Display malfunction: ERROR 3

– The water shortage safeguard prevents

the motor from being switched on in

case of a water shortage.

– Display malfunction: ERROR 4

– The water shortage safeguard (flow

switch) prevents the burner from over-

heating in case of a water shortage.

The burner operates only when there is

adequate water supply.

– Display malfunction: ERROR 5

– The combination pressure switch/flow

switch shuts down the device in case of

water shortage or leakage.

– Display malfunction: ERROR 5

– The device shuts down in the event of a

fuel shortage (fuel tank empty).

Note: The device can be operated for

another 5 minutes until the fuel tank is

completely empty by switching the de-

vice off and then on again.

– The device shuts down if the fuel sen-

sor is defective.

– Display malfunction: ERROR 6

– The pressure switch switches off the

motor when the minimum motor oil

pressure is fallen short of.

– Display malfunction: ERROR 7

– The exhaust gas thermostat switches

off the burner when the exhaust gas

temperature is too high.

– Display malfunction: ERROR 9

– If the water temperature at the burner

outlet exceeds the maximum admissi-

ble temperature, the device switches off

the burner.

– The device switches off the burner if the

temperature sensor is defective.

– Display malfunction: ERROR 10

– The flame monitoring switches off the

burner in case of a burner fault.

– Display malfunction: ERROR 11 or 12

– If the standby time of 45 minutes is ex-

ceeded, the electronics switches off the

device (factory setting).

– Display malfunction: ERROR 14 or 15

The safety catch on the trigger gun pre-

vents the appliance from being switched on

unintentionally.

High pressure hose

Function

Safety Devices

Emergency stop button

Safety switch front cover

Overflow valve

Safety valve

Charging current monitoring battery

Temperature monitoring water inlet

or cooling water

Safety mechanism against lack of

water in swimmer tank

Water shortage safeguard burner

Pressure switch/flow switch

Filling level monitoring fuel

Motor oil pressure

Temperature stop for exhaust gases

Temperature monitoring burner

Flame monitoring

Switch off after expiry of standby

time

Safety catch

22 EN

Karcher HDS 13-35 De Tr1 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info