Bedienungsanleitung Karcher HDS 2000 Super (Seite 24 von 384) (Alle Sprachen)

726176

Zoom out

Zoom in

Vorherige Seite

1/384

Nächste Seite

– 5

– The liquid softener prevents the calcifi-

cation of the heating spiral while operat-

ing with calciferous tap water It is dosed

into the swimmer tank drop by drop.

– The metering is set to medium water ri-

gidity by the manufacturer

– This setting can be adjusted to local

conditions by customer service.

Note: A sample bundle of liquid softener is

included in the delivery.

 Fill in liquid softener RM 110 into the fill

vent for liquid softener (white tank).

When working with soft water (such as rain

water), you can work without liquid soften-

er.

 Remove the lid from the vent opening

for liquid softener.

 Insert the included spring onto the lid

support.

 Replace the lid.

Note: This will prevent the indicator lamp

for the liquid softener from blinking per-

manantly.

Note: When working with tap water, this

spring will have to be removed again.

 DANGER

Risk of injury!

– Use Kärcher products only.

– Under no circumstances fill solvents

(petrol, aceton, diluting agent etc.)

– Avoid eye and skin contact.

– Observe safety and handling instruc-

tions by the detergent manufacturer.

Kärcher offers an individual cleaning

and care appliances program.

Your dealer will consult you gladly.

 Refill detergent.

For connection values refer to technical

specifications.

 Connect the supply hose (minimum

length 7.5 m, minimum diameter 3/4“) to

the water connection point of the ma-

chine and at the water supply point (for

e.g. a tap).

Note: The supply hose is not included.

If you want to suck in water from an exter-

nal vessel, the following modification is

necessary:

 Remove the water connections from the

pump heads.

 Unscrew the upper supply hoses to the

swimmer tanks and connect them to the

pump heads.

 Connect suction hose (minimum diame-

ter 3/4“) with filter (accessory) to the

water connection point.

Until the pump sucked in water, you should:

 Set the pressure/quantity regulation to

maximum quantity.

 Close the dosing valve for the detergent.

 DANGER

Risk of personal injury or damage! Never

suck in water from a drinking water contain-

er. Never suck in liquids which contain sol-

vents like lacquer thinner, petrol, oil or unfil-

tered water. The sealings within the device

are not solvent resistant. The spray mist of

solvents is highly inflammable, explosive

and poisonous.

– For connection values, see technical

data and type plate.

– The electrical connections must be

done by an electrician according to IEC

60364-1.

 DANGER

Risk of injury on account of electric shock!

– Unsuitable electrical extension cables

can be hazardous. Only use electrical

extension cables outdoors which have

been approved and labelled for this pur-

pose and have an adequate cable

cross-section.

Fill in liquid softener

Working without liquid softener

Refill detergent

Water connection

Suck in water from vessel

Power connection

24 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher HDS 2000 Super Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info