Bedienungsanleitung Karcher HDS 895 S (Seite 8 von 17) (Englisch)

538467

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

English HDS Super, HDS 695 S, HDS 745, HDS 895 S, HDS 995, HDS 1195, HDS 1295 8

Measuring out the cleaning agent

* Use cleaning agents sparingly to protect the

environment

* The cleaning agent must be suitable for the

surface to be cleaned.

Set the concentration of the cleaning agent

according to the manufacturer's

recommendations at the cleaning agent

metering valve (item 31)

Approximate values at maximum operating

pressure

Intended use

Cleaning of: Machines, vehicles, buildings,

tools, facades, terraces, garden tools, etc..

* Engine cleaning is only to be performed in

areas provided with oil separator.

* Heed appropriate safety regulations for use at

petrol stations or in other hazardous

environments.

Working with high-pressure nozzle

Spray angle is crucial to efficiency of high-

pressure jet.

Use is normally made of 25°fan jet nozzle

(included).

Recommended nozzles, available as

accessories

– For stubborn dirt 0°full jet nozzle

– For delicate surfaces and slight contamination

40°fan jet nozzle

– For thick layers of stubborn dirt dirt blaster

– Nozzle with variable spray angle, for

adaptation to various cleaning tasks variable-

angle nozzle

Cleaning

* Set pressure/temperature and cleaning-agent

concentration in line with surface to be

cleaned

* Always start by directing high-pressure jet

from a good distance at object to be cleaned

to avoid damage caused by excessive

pressure.

Recommended cleaning method

Loosen up dirt:

Spray on cleaning agent sparingly and allow to

react for 1...5 min (do not allow to dry on).

Remove dirt:

Spray off loosened-up dirt with high-pressure

jet.

Operation with cold water

Removal of slight contamination and rinsing

e.g.: Garden implements, terrace, tools, etc.

Set operating pressure as required

Set the temperature regulator (item 24) to "0"

Operation with hot water

* Danger of scalding

Set the temperature regulator (item 24) to the

required temperature

We recommend the following cleaning

temperatures

– Slight contamination 30-50°C

– Protein soiling, e.g. in foodstuffs industry

max. 60°C

– Motor vehicle cleaning, machine cleaning

60-90°C

Operation with steam

At operating temperatures above 98°C

operating pressure must not exceed 32 bar.

Therefore the standard high-pressure nozzle

must be replaced by the steam nozzle

(manufacture no.: 4.766-023, for HDS 1195

and HDS 1295 4.766-024.0; see accessories).

– Set operating pressure to minimum value.

See figure 9

– Set the temperature regulator (item 24) to

min. 100°C

* Danger of scalding!

We recommend the following cleaning

temperatures

– Preservative removal, extremely greasy dirt

100-110°C

– Thawing of aggregates, certain facade

cleaning operations up to 140°C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher HDS 895 S Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Karcher HDS 895 S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info