Bedienungsanleitung Karcher HGE 18-50 Battery (Seite 16 von 220) (Alle Sprachen)

725001

Zoom out

Zoom in

Vorherige Seite

1/220

Nächste Seite

16 English

trigger and thus prevents the hedge trimmer from start-

ing up in an uncontrolled manner.

Blade guard

The blade guard is an important component of the safe-

ty devices of the hedge trimmer. A damaged blade

guard must not be used and must be replaced immedi-

ately.

Symbols on the device

Device description

The maximum amount of equipment is described in

these operating instructions. Depending on the model

used, there are differences in the scope of delivery (see

packaging).

See graphics page for illustrations

Illustration A

1 Handle, rear

2 Power switch unlocking button

3 Handle unlocking button

4 Handle, front

5 Power switch

6 Hand guard

7 Hedge broom

8 Blade

9 Blade guard

10 *Rechargeable battery pack 18/25

11 *Fast Charger Battery Power 18V

12 Battery pack unlocking button

13 Type plate

* optional

Rechargeable battery pack

The device can be operated with a Kärcher 18 V Bat-

tery Power battery pack.

Initial startup

몇 WARNING

Uncontrolled startup

Risk of fatal injury from incision injuries

Remove the battery from the device for all preparatory

work.

Inserting the battery pack

ATTENTION

Dirty contacts

Damage to the device and battery

Check the battery mount and the contacts for soiling

and clean them as necessary before inserting the bat-

tery.

Note

Use only fully charged batteries.

Illustration B

1. Push the battery into the mounting in the device until

it audibly latches into place.

Operation

New users should be instructed by an experienced

person and practice handling and techniques be-

fore carrying out any work.

Basic operation

1. Check the cutting material for foreign bodies, such

as paper, films or wires, and remove them as neces-

sary.

2. Install the hedge broom.

Illustration C

3. Remove the blade guard.

4. Hold the hedge trimmer firmly with both hands.

Switch on the device

1. Press the trigger lockout button.

Illustration D

2. Press the trigger.

The device starts up.

3. Release the trigger.

The device stops.

Working techniques

Note

Use a snapping line to achieve an even cut.

1. Switch on the device and move it towards the cutting

material.

2. Cut leaves and thin branches with an oscillating

movement.

Illustration E

General warning symbol

Read the operating instructions and all

safety instructions before operating the

device for the first time.

Always wear suitable eye protection and

hearing protection when working with the

device.

Risk of injury. Do not touch the sharp cut-

ting tools.

Wear non-slip, sturdy gloves when work-

ing with the device.

Danger due to flung objects. Keep spec-

tators, especially children and pets, at

least 15 m away from the work area.

Do not subject the device to rain or moist

conditions.

Always hold the device with both hands.

The guaranteed sound pressure level

specified on the label is 93 dB.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher HGE 18-50 Battery Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info