Bedienungsanleitung Karcher IVM 100-36-3 (Seite 13 von 180) (Alle Sprachen)

804646

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

English 13

15 Suction turbine trigger 1

16 Suction turbine trigger 2

17 Suction head

18 Suction head lock

19 Push handle

20 Floor nozzle holder

21 Suction hose port

22 Bow handle of the dirt receptacle

23 Spacer lock

24 Cable clips

25 Chassis

Initial startup

ATTENTION

Exceeding the grid impedance

Electrical shock in the event of a short-cir-

cuit

The maximum permissible mains grid im-

pedance at the electrical connection point

(see Technical data) must not be exceed-

ed.

Contact your electricity supplier in the case

of any uncertainties regarding the mains

grid impedance at your electrical connec-

tion point.

1. Bring the device into the working posi-

tion.

2. Secure the device with the parking

brakes.

3. Insert the suction hose into the suction

connection.

4. Plug the desired accessory onto the suc-

tion hose.

5. If necessary, fit a dust collection bag in

the dirt receptacle (see chapter Fitting

the dust collection bag).

6. Ensure that the dirt receptacle is correct-

ly fitted.

Fitting the dust collection bag

A dust collection bag can be inserted into

the dirt receptacle to allow dust-free empty-

ing of the device.

Note

The dust collection bag must not be used

for wet vacuum cleaning.

1. Fit the dust collection bag in the dirt re-

ceptacle and carefully press it against

the wall of the container.

2. Fold the edge of the bag over the edge

of the dirt receptacle.

몇WARNING

Improper handling when locking the dirt

receptacle

Risk of crushing

Under no circumstances should you hold

your hands between the dirt receptacle and

filter ring or allow them to come close to the

lifting mechanism while locking it.

Lock the dirt receptacle by operating the

bow handle with both hands.

3. Fit the dirt receptacle in the device.

Operation

After vacuuming moist or liquid substances,

see chapter Switching from wet to dry vac-

uuming.

Switching on the device

1. Plug the mains plug into the socket.

2. Switch on the device via the suction tur-

bine power switches.

Note

Select the required suction power via the

suction turbine power switch, starting with

suction turbine 1. Always switch the suction

turbines on and off one after the other.

3. Start the vacuuming process.

Performing the vacuuming process

1. Regularly check the filling level in the dirt

receptacle, since the device does not

switch off automatically.

2. If necessary, empty the dirt receptacle

(see chapter Emptying the dirt recepta-

cle).

3. If necessary, clean the filter (see chapter

Cleaning the filter) or change/

replace the filter (see chapter Chang-

ing/replacing the filter).

Wet vacuum cleaning

ATTENTION

Risk of damage if the dirt receptacle

overflows

The dirt receptacle can fill within a few sec-

onds and overflow when vacuuming large

amounts of liquids.

Continuously monitor the filling level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher IVM 100-36-3 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info