Bedienungsanleitung Karcher IVM 60-30 (Seite 8 von 120) (Alle Sprachen)

804643

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

– 2

13 Lever for the filter cleaning

14 Nameplate

15 Exhaust muffler

16 Suction head lock

17 Push handle

18 Chassis

19 Steering roller

20 Cable clamp

21 Holder for suction pipe

22 Handle of the suction head

23 Rotating knob

24 Torque motor

Bring the appliance to working position - secure it,

if required, with parking brakes.

Insert the suction hose into the suction hose con-

nection.

Attach the desired accessoried to the suction hose.

Ensure that the vacuum material container has

been inserted properly.

ATTENTION

The highest allowed net impedance at the electrical

connection point (refer to technical data) is not to be ex-

ceeded. In case of confusion regarding the power im-

pedance present on your connection, please contact

your utilities provider.

몇CAUTION

Check direction of rotation of the engine at every socket

change.

Note: With correct direction of rotation a strong airflow

can be felt out of the opening of the exhaust muffler. Air

is suctioned with incorrect rotation direction.

Check the direction of rotation of the motor. Ex-

change the poles on the appliance plug if the rota-

tion direction is wrong.

After vacuuming moist or liquid substances, observe the

notes in chapter "Changing from wet vacuuming to dry

vacuuming".

Plug in the mains plug.

Switch on the appliance at the rotating knob.

Perform the suction process.

Regularly check the filling level in the dirt recepta-

cle, since the device does not switch off automati-

cally.

Empty the vacuum cleaner waste container as nec-

essary (described in the chapter "Emptying the

vacuum cleaner waste container").

If necessary, clean or replace the filter (described

in chapter “Care and maintenance”).

Caution: Constantly monitor the fill level in the dirt

receptacle when vacuuming high volumes of liquid,

as the receptacle can be filled within a matter of sec-

onds and could overflow.

On completion of wet vacuum cleaning: Dry the fil-

ter. Clean the container with a moist cloth and dry

it off.

ATTENTION

Please note the following when switching from wet

to dry vacuum cleaning:

If you vacuum dry dust while the filter element is still wet

the filter will become obstructed and may be damaged

beyond repair.

Dry the wet filter properly before use or replace it

with a dry one.

Change the filter, if required, according to instruc-

tions under the section "Maintenance and Care".

Clean the star folded filter at regular intervals.

Turn off the appliance.

If dry suction material has been vacuumed, move

the lever for the filter cleaning back and forth sev-

eral times, but 5 times at least.

If this cleaning does not bring about any improvement,

then remove the filter and wash it or replace it (see

chapter "Replacing the filter").

Switch off the appliance at the rotating knob.

Pull out the mains plug.

Turn off the appliance.

Pull out the mains plug.

If necessary, dismantle the accessory and rinse it

with water and let dry.

Empty the vacuuming material container (refer

chapter "Emptying vacuuming material container").

Vacuum and wipe the appliance inside and outside

with a damp cloth.

If wet suction material has been vacuumed, re-

move the filter for drying.

몇WARNING

Risk of crushing! Watch out for moving parts when re-

moving and replacing the container.

Note

The vacuum material container must be emptied when

it is has filled up to approx. 3 cm below the upper edge.

Regularly check the filling level in the dirt receptacle,

since the device does not switch off automatically.

Illustration

Switch off the appliance and secure it using the

parking brakes at the guide rollers.

If dry suction material has been vacuumed, move

the lever for the filter cleaning back and forth sev-

eral times, but 5 times at least.

Open the vacuum material container upwards at

the unlocking mechanism.

Start up

Power connection

Operation

Rotating knob

Appliance ON

Appliance OFF

Turning on the Appliance

Suction process

Wet vacuum cleaning

Changeover from wet to dry vacuum

cleaning

Cleaning the filter

Turn off the appliance

Shutting down

Emptying the vacuuming material container

8 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher IVM 60-30 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info