Bedienungsanleitung Karcher IVR-L 65-12-1 Tc (Seite 15 von 178) (Alle Sprachen)

804629

Zoom out

Zoom in

Vorherige Seite

1/178

Nächste Seite

English 15

Constantly check the filling level in the liq-

uid container when filling large quantities of

liquid.

Emptying the liquid container

See graphics page for illustration

1. Switch the device off and disconnect it

from the power supply.

2. Move the device to the waste water tank.

3. Empty the liquid container:

a Connect the drain hose to the upper

hose coupling.

Illustration F

b Hold the drain hose over a suitable

collecting container and drain the con-

tents.

4. Dispose of or reuse the contents in ac-

cordance with statutory regulations.

Emptying the liquid container by

tilting

See graphics page for illustrations

1. Switch the device off and disconnect it

from the power supply.

2. Move the device to the waste water tank.

3. Remove the suction head (see chapter

Removing the suction head).

4. Remove all accessory parts.

5. Prepare the liquid container for empty-

ing:

Using the tilting device Tc (Device

with tilting device Tc)

a Open the lock of the liquid container.

Illustration G

using the crane grommet (Device

without tilting device Tc)

a Lift the device onto the crane grommet

(see chapter Device description) us-

ing suitable lifting gear.

DANGER

Failure to observe the weight

Risk of injury from falling device

Observe the applicable accident prevention

guidelines and safety instructions.

Every time before lifting, check to ensure

correct functioning of the lifting device.

Only lift the device via the provided crane

grommet.

Ensure that there will be no unintentional

unhooking of the lifted load.

The crane may exclusively be operated by

qualified staff.

No people may be located within the haz-

ard zone of the crane.

Do not leave the device hanging unattend-

ed on the crane.

6. Tip the container with the push handle.

Illustration H

7. Dispose of or reuse the contents in ac-

cordance with statutory regulations.

8. Fit and lock the suction head.

Cleaning the liquid container

Note

Bacterial contamination may occur through

the use of water-based cooling lubricants.

Wear suitable protective clothing when re-

moving deposits.

1. Empty the container.

2. Remove deposits in the container.

3. Dispose of the deposits in accordance

with the applicable regulations.

4. Remove chippings and deposits from

the support plates.

Illustration I

Removing the suction head

See graphics page for illustrations

1. Switch off the device and disconnect

from the power supply.

2. Open the lock for the suction head.

Illustration J

3. Remove the suction head and put to one

side.

Finishing operation

1. Switch off the device using the on/off

switch

2. Empty and clean the liquid container.

3. Remove the accessories and clean and

dry them as necessary.

Note

Empty the vacuum cleaner after every use.

Allow the vacuum cleaner to dry with the

container open.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher IVR-L 65-12-1 Tc Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info